PAN1321I Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – BLUETOOTH® RF MODULE

New
Pr^Io^ntdN^rou^Pedrc^uwoct^dtuiocnt
Introduction
NEW! PAN1321i SERIES BLUETOOTH^® RF MODULE
Wireless Bluetooth Connectivity Compatible with Apple® and Android™ Devices
Introducing the NEW PAN1321i Series Bluetooth RF Module compatible with
Apple devices such as the iPod®, iPhone® and iPad®. The PAN1321i Series
interfaces with the Apple authentication P coprocessor and supports iPod
Accessory Protocol (iAP) to enable Bluetoothⁱ Serial Port data communication_C¹_{ut the Cable} ^TM
with Bluetooth enabled Apple devices. The PAN1321i Series wireless Bluetooth
connectivity also includes compatibility with_BA_ln_udr_eoi_td_o, s_om_ta_hrt_-Mpho_on_des_ua_ln_ed _Pm_Aos_Nt ₁₄₅₀
Bluetooth enabled devices².
This New Series of Bluetooth RF Modules is a highly integrated, cost
engineered solution for Bluetooth applications using Serial P^Oo^Ur^Tt^LIP^NEr^So^-f^Ei^Nle^W8(⁹S⁸⁰P^3JP).
The PAN1321i Series is a comprehensive Bluetooth system solution, with an The PAN1450 provides wireless interface per the BT 1.2
specification. Interoperability and BT compliance testing have
integrated
controller,
GPIO,
AT
Command
Set
Application
Program Interface been completed for the BT Chip ZV4301 from Zeevo, Inc. to
facilate rapid time-to-market.
The BT Chip incorporates a widely popular 32-bit ARM7TDMI^TM
(API), antenna, Bluetooth transceiver, SPP Profile, FCC and IC certifications and Bluetooth ^{CPU core with sufficient bandwidth to support a wide range of} end product listing. Using
embedded µController applications and the module provides
Panasonic’s
exclusive
“tiny
footprint”
technology,
incorporating a Surface Mount Device (SMD) full ARM7 software development access.
The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm³
Land
Grid
Array
(LGA)
package, the PAN1321i Series is just 15.6 mm by 8.7 mm!
A fully shielded case protects SMD package and the only external component needed is an
50 ohm antenna.
the
transceiver
from
nearby
Any customizations for the software can be handled
RF emitters, simplifying PCB layout. The PAN1321i is qualifie^wd^ith to^our the Bluetooth ^{recommended partners.} 2.0 standard.
FEATURES
The
NEW
PAN1321i
is
ideal
for
all
applications
migrating
from USB or RS232 Overview
- Inquiry results with RSSI (1.2)
to
wireless.
The integrated Bluetooth
SPP is easily accessed using a simple AT command set.
Evaluation and Development Kits are available. - Adaptive frequency hopping (AFH) enabled (1.2)
- High throughput (>600 kbps)
- Hold-, Park- and Sniffmode
Product Performance:
- Up to 128 bit encryption
- Audio capability on an SCO channel
- Support for very low power modes - sleep and deep sleep
- All bluetooth data rates (up to 57,6/723,2Kbps)
• Supports iPod Accessory Protocol (iAP)
• Supported Profiles: RFCOMM, SPP device A and B
• Complete Bluetooth 2.0 + EDR solution
• Dimensions: 15.6 x 8.7 x 2.8 mm³
• Ultra low power design
•
On-module voltage ^{User Interfaces}
- Full-speed USB version 2.0 compliant
regulator.
External
supply
2.7-3.6V
- Programmable baud rate UART (9,6 Kbps - 921,6 Kbps)
• Integrates ARM7TDMI, RAM and patchable 256k - Debug UART (DUART)
- 16 General Purpose I/O‘s (interruptible)
-
-
EEPROM ^{PCM audio (1 channel)}
SPI and JTAG interface
(for
device
configuration
data
and
application) ^{Radio Features}
- High sensitivity design (-86 dBm typ.)
- Integrated RF shield
OOTH ^QUAL
B01839
• Based upon Infineon’s PMB8753/2 - Class 2 module (0dBm typ. output power)
- One antenna port
PRODUCT
• Certifications: Bluetooth, FCC, CE and IC
• Reference clock included ^{Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt}
regarding the safety of this product, kindly inform us immediately for technical consultation.
PAN1450 Rev. A
• No external components needed
• Low power clock from internal oscillator or external
• Operating Temperature Range: -40ºC to +85ºC
low power clock
PAN1321i Part Number:
Part Numbers
Description
ENW-89811A6KF PAN1321i, Bluetooth Module v 2.0, EDR, SPP, with antenna
EVAL_PAN1321i PAN1321i Evaluation Kit
1. Apple authentication coprocessor and MFI certification is required.
2. Connectivity requires that devices support Bluetooth Serial Port Profile.
Apple, iPod, iPhone and iPad are registered trademarks of Apple Inc.
Android is trademark of Google Inc.
The Bluetooth^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corpora-
tion of North America is under license. Other trademarks and trade names are those of their respective owners.
www.panasonic.com/rfmodules
[e-mail]
1-800-344-2112
Copyright © 2011 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
Rev 1.0 PAN1321iNPI, FY11-076-XXX