PAN1310-HCI-2.1 Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Bluetooth V2.1 HCI Module

P

Cut the Cable ^TM
Bluetooth V2.1 HCI Module
PAN1310-HCI-2.1
(Picture shows similar Module
OUTLINES - ENW89814C2MF
Now you can integrate Bluetooth very easy in your final
product, with the PAN1310-HCI. If you are searching for a
SPP version, please have a look to PAN1311/PAN1321.
The PAN1310 is manufactured in a 11,6 x 8,7 x 1.8 mm³
SMD LGA package with shielded case and qualified to the
Bluetooth 2.1 standard.
Due to a very low price PAN1310 is well suited for units
produced in all quantities, if you are able to integrate an HCI
module into your application.
This module follows the national and international
regulations, e.g. EMC, Safety, EN300328, FCC and IC.
FEATURES
General
- Complete Bluetooth 2.1 + EDR solution
- Ultra low power design
- Temperature range from -40°C to 85°C
- Integrates ARM7TDMI, RAM and patchable ROM
- On-module voltage regulator. External supply 2.7-3.6V
- Reference clock included
- Low power clock from internal oscillator or external low power clock
(e.g. 32.768 kHz)
- Dynamic low power mode switching
- No external components except antenna is needed
Interfaces
- 3.25 MBaud UART with transport layer detection
(HCI UART, HCI Three-Wire UART)
- PCM/I2S interface for digital audio
- WLAN coexistence interface
- General purpose I/Os with interrupt capabilities. JTAG for boundary
scan and debug
Bluetooth
- Piconet with seven slaves. Scatternet with two slave roles
while still being visible
- SCO and eSCO with hardware accelerated audio signal processing
- Power control and RSSI. Hold, Park and Sniff.
- Adaptive Frequency Hopping, Quality of Service, Channel Quality
Driven Data Rate
- Bluetooth security features: Authentication, Pairing and Encryption
- Bluetooth test mode and Infineon’s active Bluetooth tester mode
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt
regarding the safety of this product, kindly inform us immediately for technical consultation.
PAN1310 BT2.1 Rev. B1
www.pedeu.panasonic.de
[e-mail]
Hardware Status:
Mass Production