PAN1026 Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Dual Mode, Place and Play Bluetooth Module

Panasonic
New Product Introduction
New PAN1026 Series
Place and Play Bluetooth^® Module
RoHS
COMPLIANT
Dual Mode, Place and Play Bluetooth Module
Introducing Panasonic’s Bluetooth dual mode, place and play RF module, the PAN1026 featuring an embedded ARM
processor, Bluetooth 4.0, serial port profile (SPP), command set API and integrated antenna. This cost-engineered solution
is based on a single chip solution that integrates an ARM processor with a Bluetooth controller. Bluetooth 4.0 combines the
data rate of Bluetooth Classic (3Mb/s) and ultra-fast connection time of Bluetooth Low Energy (3mS). Bluetooth Low Energy
is designed to create low data rate networks using a minimum amount of power. The embedded serial port profile (SPP) frees
application resources while the command set API creates a simple but flexible firmware interface. An onboard antenna does
away with 2.4GHz RF circuit complexity.
Created with the design engineer in mind, product design cycles are greatly reduced using Panasonic’s free of charge
reference design and design review services¹. PCB layouts are simplified using available Gerber files and minimized with
Panasonic’s tiny footprint technology. The module is just 15.6mm x 8.7mm x 1.9mm and fully shielded to improve immunity.
All Panasonic Bluetooth RF modules carry FCC, IC, CE and Bluetooth certifications.
The PAN1026 recognizes Apple’s authentication coprocessor and supports Bluetooth communication² with Apple’s iPhone
and iPad®. Connectivity also includes Android, smart phones and all Bluetooth enabled devices³.
Prototyping and testing are accelerated by utilizing the EVAL_PAN1026 development
kit and EasyDualMode software development environment. The EVAL_PAN1026
contains two PAN1026ETU development modules on Panasonic’s ETU platform
– ETU for Easy to Use. EasyDualMode allows both BLE and Bluetooth Classic
application development in a single environment. EasyDualMode software is
available free of charge on Panasonic’s RF module website.
PAN1026ETU Development Module
1. Services are reserved for qualified customers. Contact one of Panasonic manufacturer’s sales representatives for more information.
2. Apple authentication coprocessor and MFI certification are required for communicating with Apple Idevices.
3. Connectivity requires that devices support Bluetooth Serial Port Profile
*Apple iPad and iPhone are trademarks of Apple Inc
Features
• Bluetooth Version 4.0
• Industrial Temperature Range, -40 to +85°C
• High Sensitivity: -87dbm
• Output Power: 4dbm
• Single V_CC Supply: 1.7 to 3.6 V
• WiFi Coexistence
• High-Speed Interfaces: USB 2.0 UART up to 4.3 Mbps
• Integrated ARM 32-Bit Processor
Applications
• iOS and Android Devices
• Wireless Sensors
• Cable Replacement
• Instrumentation
• Medical
• Automotive
Website: www.panasonic.com/industrial
[e-mail]
1-800-344-2112
Copyright © 2013 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
PAN1026 Series NPI, FY13-078-XXX