ON1215 Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – CNZ1215 (ON1215)

Transmissive Photosensors (Photo Interrupters)
CNZ1215 (ON1215)
Photo Interrupter
For contactless SW, object detection
Overview
CNZ1215 is a photocoupler in which a visible light emitting diode
is used as the light emitting element, and a high sensitivity Darlington
phototransistor is used as the light detecting element. The two
elements are arranged so as to face each other, and objects passing
between them are detected.
Mark for indicating
LED side
25.0±0.35
14.3±0.3
3.0±0.2
Unit : mm
2-0.45±0.2
*10.0
+0.1
–0.4
2
19.0±0.2
3
2-ø3.2±0.2
Features
Highly precise position detection : 0.3 mm
Large output current : IC = 2 mA (min.)
1
4
2
3
High resolution
Absolute Maximum Ratings (Ta = 25˚C)
1
4
Pin connection
(Note) * is dimension at the root of leads
Parameter
Symbol Ratings Unit
Reverse voltage (DC) V_R
3
V
Input (Light
Forward current (DC)
emitting diode)
I_F
25
mA
Power dissipation
P_D*1
70
mW
Collector current
I_C
30
mA
Output (Photo Collector to emitter voltage VCEO 20
V
transistor)
Emitter to collector voltage V_ECO
5
V
Collector power dissipation P_C*2 100 mW
Temperature ^{Operating ambient temperature Topr –25 to +80 ˚C}
Storage temperature
T_stg –30 to +100 ˚C
Electrical Characteristics (Ta = 25˚C)
*1 _{Input power derating ratio is}
0.93 mW/˚C at Ta ≥ 25˚C.
*2 _{Output power derating ratio is}
1.33 mW/˚C at Ta ≥ 25˚C.
Parameter
Symbol
Conditions
Input Forward voltage (DC)
V_F I_F = 20mA
characteristics Reverse current (DC)
I_R V_R = 3V
Output Collector cutoff current
I_CEO V_CE = 10V
characteristics Collector to emitter capacitance C_C V_CE = 10V, f = 1MHz
Collector current
I_C V_CE = 10V, I_F = 5mA, R_L = 300Ω
Transfer _{Response time}
characteristics
t_r , t_f* V_CC = 10V, I_C = 5mA, R_L = 100Ω
Collector to emitter saturation voltage V_CE(sat) I_F = 10mA, I_C = 1mA
* _{Switching time measurement circuit}
min typ max Unit
2.1 2.8 V
5
µA
100 600 nA
5
pF
2
mA
100
µs
0.7 1.5 V
Sig.IN
;; ^50Ω
V_CC
;;;Sig.OUT
R_L
(Input pulse)
(Output pulse) _td
t_r
90%
10%
t_f
t_d : Delay time
t_r : Rise time (Time required for the collector current to increase
from 10% to 90% of its final value)
t_f : Fall time (Time required for the collector current to decrease
from 90% to 10% of its initial value)
Note) The part number in the parenthesis shows conventional part number.
1