MN103SJ9 Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – 30 internal interrupts: Watchdog timer. Timer

MN103SJ9 Series
Type
Internal ROM type
ROM (byte)
RAM (byte)
Package (Lead-free)
Minimum Instruction
Execution Time
MN103SFJ9D
FLASH
64K
4K
QFP044-P-1010F
16.7 ns (4.5 V to 5.5 V)
 Interrupts
8 external interrupts
30 internal interrupts: Watchdog timer. Timer. Serial I/F. PWM. A/D conversion finish. System error. Fail-safe function
 Timer Counter
8-bit timer × 8
Timer 0 to 7 ...........Interval timer. Event count. Cascading connectable
16-bit timer × 3
Timer 16 ................Interval timer. Event count. PWM output. Double buffer
Timer 18 ................Interval timer. Event count. PWM output (6 pins simultaneous output are available). Double buffer
Timer 20 ................Interval timer. Double buffer. Start synchronized with 3-phase PWM are available
Watchdog timer × 1
 Serial interface
UART (full duplex) /Synchronous interfaces selective × 3
Serial 0, 1...............1-bit to 8-bit transmission (synchronous). 2 and 3 channel type selectable (synchronous)
 I/O Pins
I/O
30 : Common use × 30
 A/D converter
10-bit × 1 unit. 12-bit × 1 unit. 8 channels
Minimum conversion time: 1.0 µs
Simultaneous conversion of 2 series are available
Conversion start synchronized with 3-phase PWM or timer 20 are available
 Motor Control PWM
16-bit 3-phase PWM
Triangular waveform or jigsaw waveform. Dead time setup. Double buffer. Output polar switching is available. PWM output pin protect
function
 Clock monitoring function
The stop of the system clock or abnormal frequency of the system clock can be detected
 Reset
Automatic Reset
 Internal oscillation
10 MHz
 Electrical Charactreistics (A/D converter characteristics)
Parameter
Symbol
Condition
Non-linear error
A/D conversion time
Analog input voltage
TAD
VIA
10 bit / 12 bit
min
Limit
typ max
Unit
±3 LSB
1.0
µs
VSS
VDD V
Ta = 25 °C. VDD = 5.0 V. VSS = 0 V
MAF00040AEM