MN103SG5 Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – 65 internal interrupts: Watchdog timer. Timer. Serial I/F. PWM. A/D conversion finish

MN103SG5 Series
Type
Internal ROM type
ROM (byte)
RAM (byte)
Package (Lead-free)
Minimum Instruction
Execution Time
MN103SFG5K
FLASH
256K
12K
LQFP128-P-1818C
16.7 ns (4.5 V to 5.5 V)
 Interrupts
16 external interrupts
65 internal interrupts: Watchdog timer. Timer. Serial I/F. PWM. A/D conversion finish. System error
 Timer Counter
8-bit timer × 16
Timer 0 to 15 .........Interval timer. Event count. Cascading connectable
16-bit timer × 8
Timer 17, 19, 24 ....Interval timer. Event count. PWM output. Double buffer
Timer 18, 23 ..........Interval timer. Event count. PWM output (6 pins simultaneous output are available). Double buffer
Timer 20 to 22 .......Interval timer. Event count. PWM output. Double buffer. Start synchronized with 3-phase PWM are available
 Serial interface
Multi-master I²C/Synchronous interface selective × 1
Serial 0...................1-bit to 8-bit transmission (synchronous). 2 and 3 channel type selectable (synchronous)
UART (full duplex) /Synchronous interfaces selective × 3
Serial 1...................1-bit to 8-bit transmission (synchronous). 2 and 3 channel type selectable (synchronous)
Serial 2, 3...............7-bit, 8-bit transmission
 I/O Pins
I/O
112 : Common use × 110
 A/D converter
10-bit × 3 unit. 28 channels
Minimum conversion time: 1.0 µs
Simultaneous conversion of 3 series are available
Conversion start synchronized with 3-phase PWM or timer 20, 21, 22 are available
 Motor Control PWM
16-bit 3-phase PWM × 3
Triangular waveform or jigsaw waveform. Dead time setup. Double buffer. Output polar switching is available. PWM output pin protect
function
 Arithmetic unit for inverter system
This series implement the instructions as follows.
High-speed multiplication. High-speed division. Square-root. Absolute value. Trigonometric functions. 2/3 transform. 3/2 transform.
Low-pass filter. PI control
 Electrical Charactreistics (A/D converter characteristics)
Parameter
Symbol
Condition
Non-linear error
A/D conversion time
Analog input voltage
TAD
VIA
10-bit
min
Limit
typ max
Unit
±3 LSB
1.0
µs
VSS
VDD V
Ta = 25 °C. VDD = 5.0 V. VSS = 0 V
MAF00032CEM