MN101E33G Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – MN101E33G

MN101E33G, MN101E33K
Type
Internal ROM type
ROM (byte)
RAM (byte)
Package (Lead-free)
Minimum Instruction
Execution Time
MN101E33G
MN101E33K
MN101EF33N
Mask ROM
FLASH
128K
256K
512K
6K
12K
30K
QFP100-P-1818B (Under planning)
QFP100-P-1818B (Under development)
0.05 µs (at 3.0 V to 3.6 V, 20 MHz at internal 2, 4, 8 times oscillation))
0.0588 µs (at 2.7 V to 3.6 V, 17 MHz)
0.05 µs (at 3.0 V to 3.6 V, 20 MHz)
30.6 µs (at 2.7 V to 3.6 V, 32.768 kHz)
 Interrupts
RESET, Watchdog, External 0 to 5, Timer 0 to 3, Timer 6, Timer 7 (2 systems), Timer A to E, Time base, Serial 0 (2 systems), Serial
1 (2 systems), Serial 2, Serial 3 (2 systems), Serial 4 (2 systems), Automatic transfer finish (2 systems), A/D conversion finish, Key
interrupts, IEBus*
* IEBus is a trademark of NEC Electronics Corporation.
 Timer Counter
Timer counter 0 : 8-bit × 1
(square-wave/8-bit PWM output, event count, simple pulse width measurement, real time output control)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 0
Timer counter 1 : 8-bit × 1
(square-wave output, event count, synchronous output event, 16-bit timer with casscade connection (Timer 0 and
connection), serial clocke output)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1
(square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement, real time output
control, serial baud rate timer)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 2
Timer counter 0, 1, 2 can be cascade-connected.
Timer counter 3 : 8-bit × 1 (square-wave output, event count, serial baud rate timer)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 0, 1, 2, 3 can be cascade-connected.
Timer counter 6 : 8-bit freerun timer , time base timer
Clock source................ 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096,
1/8192 of XI oscillation clock frequency
Interrupt generating cycle.... 1/128, 1/256, 1/512, 1/1024, 1/8192 1/32768 of OSC oscillation clock frequency; 1/128, 1/256, 1/512,
1/1024, 1/8192, 1/32768 of XI oscillation clock frequency
Interrupt source ........... coincidence with compare register 6
MAD00065BEM