MN101D08E Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – MN101D08E

MN101D08E
Type
Internal ROM type
ROM (byte)
RAM (byte)
Package (Lead-free)
Minimum Instruction
Execution Time
MN101D08E
MN101DF08G
Mask ROM
FLASH
80K
128K
2K
4K
LQFP080-P-1414A
[With main clock operated]
0.1397 µs (at 4.0 V to 5.5 V, 14.32 MHz)
71.5 µs (at 2.7 V to 5.5 V, 14.32 MHz internal
frequency di Vision)
[When sub-clock operated]
61 µs (at 2.5 V to 5.5 V, 32.768 kHz)
0.1397 µs (at 4.0 V to 5.5 V, 14.32 MHz)
71.5 µs (at 2.7 V to 5.5 V, 14.32 MHz internal
frequency di Vision)
61 µs (at 2.5 V to 5.5 V, 32.768 kHz)
 Interrupts
RESET, Runaway, External 0 to 4, Timer 0 to 3, Timer 6, Capstan FG, Control, HSW, Cylinder(Drum) FG, Servo V-sync,
Synchronous output, OSD, XDS, Serial 1, Serial 2, PWM 4, OSD V-sync
 Timer Counter
Timer counter 0 : 8-bit × 1 (timer function)
Clock source................ 1/4, 1/16 of system clock frequency
Interrupt source ........... overflow of timer counter 0
Timer counter 1 : 8-bit × 1 (timer function, linear timer counter function)
Clock source................ 1/4 of system clock frequency; CTL signal
Interrupt source ........... overflow of timer counter 1
Timer counter 2 : 16-bit × 1 (timer function, input capture (CTL specified edge), duty judgment of CTL signal)
Clock source................ 1/4, 1/16, 1/24 of system clock frequency
Interrupt source ........... overflow of timer counter 2; input of CTL specified edge; underflow of timer 2 shift register 4-bit counter;
coincidence of timer 2 shift register with timer 2 shift register compare register
Timer counter 3 : 16-bit × 1 (timer function)
Clock source................ 1/4, 1/16 of system clock frequency
Interrupt source ........... overflow of timer counter 3
Timer counter 5 : 19-bit × 1 (watchdog, stable oscillation waiting function)
Clock source................ system clock
Watchdog interrupt source... 1/2¹⁶, 1/2¹⁹ of timer counter 5 frequency
Clear by stable oscillation ... after 256 counts by timer counter 5 (2¹⁸ counts of OSC oscillation clock)
Timer counter 6 : 16-bit × 1 (clock function [max. 2 s])
Clock source................ 1/512 of OSC oscillation clock frequency; XI oscillation clock; 1/8, 1/128 of system clock frequency
Interrupt source ........... 1/2¹³, 1/2¹⁴, 1/2¹⁵ overflow of timer counter 6
 Serial interface
Serial 1 : 8-bit × 1 (synchronous type)
(transfer direction of MSB/LSB selectable, start condition function)
Clock source................ 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; NSBT1 pin input
Serial 2 : 8-bit × 1 (I²C) (master transmission/reception, slave transmission/reception)
Clock source................ 1/144 to 1/252 of system clock; SCK pin input
MAD00032EEM