MN101CF96D Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – MN101CF96D

MN101CF96D, MN101CF96F
Type
Internal ROM type
ROM (byte)
RAM (byte)
Package (Lead-free)
Minimum Instruction
Execution Time
MN101CF96D
MN101CF96F
FLASH
64K
96K
3K
6K
LQFP064-P-1414 (Under planning)
[Standard]
0.2 µs (at 2.7 V to 3.6 V, 10 MHz)
0.5 µs (at 2.7 V to 3.6 V, 4 MHz)
62.5 µs (at 2.7 V to 3.6 V, 32 kHz)
[Double speed]
0.1 µs (at 2.7 V to 3.6 V, 10 MHz)
 Interrupts
RESET, Watchdog, External 0 to 5, Timer 0 to 8, Time base, Serial 0 reception, Serial 0 transmission, Serial 1 reception, Serial 1
transmission, Serial 2, Serial 3, Automatic transfer finish, A/D conversion finish, Key interrupts (8 lines)
 Timer Counter
Timer counter 0 : 8-bit × 1
(square-wave/8-bit PWM output, event count, pulse width measurement, serial clock output, real-time output control,
generation of remote control carrier)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event, serial clock output)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1
(square-wave output, PWM output, event count, pulse width measurement, synchronous timer, serial clock output)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 2
Timer counter 0, 1, 2 can be cascade-connected.
Timer counter 3 : 8-bit × 1 (square-wave output, event count, serial clock output)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 0, 1, 2, 3 can be cascade-connected.
Timer counter 4 : 8-bit × 1
(square-wave/8-bit PWM output, event count, pulse width measurement, real-time output control, serial clock output)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; 1/1 of external clock input frequency
Interrupt source ........... coincidence with compare register 4
Timer counter 5 : 8-bit × 1
(square-wave/8-bit PWM output, event count, pulse width measurement, serial clock output)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 5
Timer counter 4, 5 can be cascade-connected.
MAD00054CEM