MN101CB6 Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – MN101CB6 Series

MN101CB6 Series
Type
Internal ROM type
ROM (byte)
RAM (byte)
Package (Lead-free)
Minimum Instruction
Execution Time
MN101CB6A
32K
1K
MN101CB6D
MN101CB6G
Mask ROM
64K
124K
2K
SSOP032-P-0300B
0.10 µs (at 2.7 V to 3.6 V, 10 MHz)
0.125 µs (at 1.8 V to 3.6 V, 8 MHz)
100 µs (at 1.8 V to 3.6 V, 20 kHz)
MN101CFB6G
FLASH
128K
 Interrupts
RESET. Watchdog. External 0 to 4. Timer 0 to 3. Timer 7 (2 systems). Time base. Serial 0 (2 systems). A/D conversion finish
 Timer Counter
8-bit timer × 5
Timer 0 ..................Square-wave/8-bit PWM output. Event count. Simple pulse width measurement. Added pulse (2-bit) type PWM
output. Square-wave/PWM output to large current terminal P35 possible
Timer 1 ..................Serial 0 baud rate timer
Timer 2 ..................Square-wave output. Added pulse (2-bit) type PWM output. PWM output. Event count. Simple pulse width
measurement. Serial 0 baud rate timer. Square-wave/PWM output to large current terminal P34 possible
Timer 3 ..................Interval timer
Timer 6 ..................8-bit freerun timer
Timer 0, 1 can be cascade-connected
Timer 2, 3 can be cascade-connected
16-bit timer × 1
Timer 7 ..................Square-wave output. 16-bit PWM output (cycle/duty continuous variable). Event count. Pulse width measurement.
Input capture. Square-wave/PWM output to large current terminal P33 possible
Time base timer: One-minute count setting
Watchdog timer × 1
Watchdog timer 2 × 1
 Serial interface
Synchronous type/UART (full-duplex) × 1: Serial 0
 I/O Pins
I/O
17 : Common use. Specified pull-up resistor available. Input/output selectable (bit unit)
 A/D converter
10-bit × 5 channels (with S/H)
 Special Ports
High-current drive port
 ROM Correction
Correcting address designation: Up to 3 addresses possible
 Gain Amplifier
2 channels
 Reference Power Supply Output
1.7 V: Output to REF17 terminal possible. Supply to A/D converter input, A/D converter reference voltage and a reference power for
Double Booster Circuit possible
 Double Booster Circuit
Counle boosts REF17 terminal input voltage or Reference Power Supply Output
 Reset
Automatic Reset
 Internal oscillation
High speed: 8 MHz. Low speed: 20 kHz
MAD00077CEM