MN101C70C Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – MN101C70C

MN101C70C
Type
Internal ROM type
ROM (byte)
RAM (byte)
Package (Lead-free)
Minimum Instruction
Execution Time
MN101C70C
Mask ROM
48K
2K
LQFP080-P-1414A,
TQFP080-P-1212D (Under planning)
0.1 µs (at 3.0 V to 3.6 V, 10 MHz)
0.235 µs (at 1.8 V to 3.6 V, 4.25 MHz)
62.5 µs (at 1.8 V to 3.6 V, 32 kHz)
MN101CF70D
FLASH
64K
4K
LQFP080-P-1414A (Under development),
TQFP080-P-1212D (Under planning)
0.25 µs (at 3.0 V to 3.6 V, 8 MHz)
0.50 µs (at 2.28 V to 3.6 V, 4 MHz)
62.5 µs (at 2.2 V to 3.6 V, 32 kHz)
 Interrupts
RESET, Watchdog, External 0 to 2, External 4 (key interrupt dedicated), Timer 0 to 3, Timer 6, Timer 7 (2 systems), Timer 8 (2
systems), Time base, Serial 0 (2 systems), Serial 2, A/D conversion finish, Automatic transfer finish
 Timer Counter
Timer counter 0 : 8-bit × 1
(square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement,
added pluse
(2-bit) system PWM output, real time output control)
(square-wave/PWM output to large current terminal P50 possible)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 0
Timer counter 1 : 8-bit × 1
(square-wave output, event count, synchronous output event, serial transfer clock output)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1
(square-wave output, added pluse (2-bit) system PWM output, PWM output, serial transfer clock output, real time
output control, event count, synchronous output event, simple pulse width measurement)
(square-wave/PWM output to large current terminal P52 possible)
Clock source................ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 2
Timer counter 3 : 8-bit × 1
(square-wave output, event count, generation of remote control carrier, serial transfer clock)
Clock source................ 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of
XI oscillation clock frequency; external clock input
Interrupt source ........... coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 6 : 8-bit freerun timer
Clock source................ 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock frequency; 1/1, 1/128, 1/8192
of XI oscillation clock frequency
Interrupt source ........... coincidence with compare register 6
Timer counter 7 : 16-bit × 1
(square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output event,
pulse width measurement, input capture, real time output control, high performance IGBT output (Cycle/Duty can be
changed constantly))
(square-wave/PWM output to large current terminal P51 possible)
Clock source................ 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1,
1/2, 1/4, 1/16 of external clock input frequency
Interrupt source ........... coincidence with compare register 7 (2 lines), input capture register
MAD00035JEM