MN101C61G Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Timer counter 0 : 8-bit X 1

MN101C61D, MN101C61G
Type
ROM (× 8-bit)
RAM (× 8-bit)
Package
Minimum Instruction
Execution Time
Interrupts
Timer Counter
MN101C61D (under development)
MN101C61G
64 K
128 K
3K
12 K
TQFP080-P-1212D ^*Lead-free
Standard: 0.1 µs (at 2.5 V to 3.6 V, 20 MHz)
0.2 µs (at 2.1 V to 3.6 V, 10 MHz)
0.5 µs (at 1.8 V to 3.6 V, 4 MHz)*
125 µs (at 1.8 V to 3.6 V, 32 kHz)*
Double speed: 0.1 µs (at 2.5 V to 3.6 V, 10 MHz)
0.2 µs (at 2.1 V to 3.6 V, 5 MHz)
0.5 µs (at 1.8 V to 3.6 V, 2 MHz)*
62.5 µs (at 1.8 V to 3.6 V, 32 kHz)*
* The operation guarantee range for flash memory built-in type is 2.2V to 3.0 V or 2.7V to 3.6 V.
• RESET • Watchdog • External 0 • External 1 • External 2 • External 3 • External 4 • External 5
• Timer 0 • Timer 1 • Timer 2 • Timer 3 • Timer 4 • Timer 5 • Timer 6 • Time base
• Serial 0 reception • Serial 0 transmission • Serial 1 reception • Serial 1 transmission • Serial 2 • Serial 3
• Automatic transfer finish • A/D conversion finish • Timer 7 (2 systems) • Key interrupts (8 lines)
Timer counter 0 : 8-bit × 1
(square-wave/8-bit PWM output, event count, generation of remote control carrier, pulse width measurement)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1
(square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 2
Timer counter 3 : 8-bit × 1 (square-wave output, event count, generation of remote control carrier)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 4 : 8-bit × 1
(square-wave/8-bit PWM output, event count, pulse width measurement, serial 1 baud rate timer)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency;
1/1 of external clock input frequency
Interrupt source ················ coincidence with compare register 4
Timer counter 5 : 8-bit × 1
(square-wave/8-bit PWM output, event count, pulse width measurement, serial 0 baud rate timer)
Clock source ······················ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock
frequency; 1/1 of XI oscillation clock frequency;
1/1 of external clock input frequency
Interrupt source ·················· coincidence with compare register 5
MAD00009EEM