MN101C589 Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – MN101C589

MN101C589 , MN101C58A
Type
ROM (×8-bit)
RAM (×8-bit)
Package
Minimum Instruction
Execution Time
Interrupts
Timer Counter
MN101C589
MN101C58A
24 K
32 K
1.5 K
1.5 K
LQFP064-P-1414 ^*Lead-free
0.1 µs (at 4.5 V to 5.5 V, 20 MHz)
0.25 µs (at 2.7 V to 5.5 V, 8 MHz)*¹
62.5 µs (at 2.0 V to 5.5 V, 32 kHz)*^1,2
*¹ The lower limit for operation guarantee for flash memory built-in type is 4.5 V.
*² The lower limit for operation guarantee for EPROM built-in type is 2.3 V.
• RESET • Watchdog • External 0 • External 1 • External 2
• External 4 (key interrupt dedicated) • Timer 0 • Timer 1 • Timer 2 • Timer 3 • Timer 6 • Time base
• Timer 7 (2 systems) • Timer 8 (2 systems) • Serial 0 (2 systems) • A/D conversion finish
Timer counter 0 : 8-bit × 1
(square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width
measurement) (square-wave/PWM output to large current terminal P50 possible)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/8192, 1/32768 of OSC
oscillation clock frequency; 1/1 of XI oscillation clock frequency; external
clock input
Interrupt source ················ coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1
(square-wave output, additional pulse type 10-bit PWM output, event count, synchronous output event,
simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 2
Timer counter 3 : 8-bit × 1
(square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC
oscillation clock frequency; 1/1 of XI oscillation clock frequency; external
clock input
Interrupt source ················ coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 6 : 8-bit freerun timer
Clock source ····················· 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock
frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency
Interrupt source ················ coincidence with compare register 6
Timer counter 7 : 16-bit × 1
(square-wave output, IGBT/16-bit PWM output (cycle / duty continuous variable), event count, synchronous
output evevt, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51
possible)
Clock source ····················· 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC
oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency
Interrupt source ················ coincidence with compare register 7 (2 lines)
Timer counter 8: 16 bit × 1
(square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input
capture)
(square-wave/PWM output to large current terminal P53 possible)
1
MAD00014DEM