English
Language : 

MN101C35 Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – The lower limit for operation guarantee for EPROM built-in type is 2.7 V
MN101C35D
Type
ROM (×8-bit)
RAM (×8-bit)
Package
Minimum Instruction
Execution Time
Interrupts
Timer Counter
Serial Interface
1
MN101C35D
64 K
2K
QFP100-P-1818B *Lead-free
0.25 µs (at 2.7 V to 5.5 V, 8 MHz)
125 µs (at 2.2 V to 5.5 V, 32 kHz)*
* The lower limit for operation guarantee for EPROM built-in type is 2.7 V.
• RESET • Watchdog • External 0 • External 1 • External 2 • External 3 • External 4 • Timer 0
• Timer 1 • Timer 2 • Timer 3 • Timer 4 • Timer 5 • Time base • Serial 0 • Serial 1 • Serial 2
• Automatic transfer finish • A/D conversion finish • Key scan
Timer counter 0 : 8-bit × 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier)
Clock source ····················· 1/1, 1/4 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················ coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event)
Clock source ····················· 1/16, 1/64 of system clock frequency; 1/1 of XI oscillation clock frequency;
external clock input
Interrupt source ················ coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1 (square-wave/8-bit PWM output, event count, synchronous output event)
Clock source ····················· 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency;
external clock input
Interrupt source ················ coincidence with compare register 2
Timer counter 3 : 8-bit × 1
(square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer)
Clock source ····················· 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················ coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 4 : 16-bit × 1
(square-wave/16-bit PWM output, event count, synchronous output event, input capture)
Clock source ····················· 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················ coincidence with compare register 4
Time base timer (one-minute count setting, independently operable 8-bit timer counter 5)
Clock source ····················· 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency;
1/1, 1/8192 of XI oscillation clock frequency
Interrupt source ················ coincidence with compare register 5; 1/8192 prescaler overflow
Watchdog timer
Interrupt source ················ 1/2097152 of system clock frequency
Serial 0 : synchronous type/simple UART (half-duplex) × 1
Clock source ····················· 1/2, 1/4, 1/16 of system clock frequency; 1/2 of timer counter 3 frequency
Serial 1 : synchronous type × 1
Clock source ····················· 1/2, 1/8, 1/64 of system clock frequency; 1/2 of timer counter 3 frequency
Serial 2 : synchronous type/simple I2C × 1
Clock source ····················· 1/1, 1/2, 1/4 of system clock frequency; 1/2 of timer counter 0 frequency
MAD00024DEM