English
Language : 

JJ-M Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – COMPACT SIZE AUTOMOTIVE RELAY
JJ-M
JJ-M RELAYS COMPACT SIZE
AUTOMOTIVE RELAY
FEATURES
15.5
.610
12
.472
13.9
.547
• Compact (half-size).
The base area is approximately half the
size of conventional (JS-M) relays. The
controller unit can be made more
compact.
Base area has been reduced by one half
16
.630
mm inch
JSM 22
.866
12
.472
JJM 15.5
.610
Compliance with RoHS Directive
• Perfect for automobile electrical
systems.
Over 2 × 105 openings possible with a 14
V DC motor load, an inrush current of 25
A, and steady state current of 5 A.
(N.O. side)
• Standard terminal pitch employed
The terminal array used is identical to
that used in small automotive relays.
• Plastic sealed type.
Plastically sealed for automatic cleaning.
• Line-up of 1 Form A and 1 Form C.
TYPICAL APPLICATIONS
• Power windows
• Auto door lock
• Electrically powered sun roof
• Electrically powered mirror
• Cornerring lamp, etc.
SPECIFICATIONS
Contact
Arrangement
1 Form A
1 Form C
Contact material
Ag alloy (Cadmium free)
Initial contact resistance (Initial)
(By voltage drop 6V DC 1A)
Typ. 5 mΩ
Rating
(resistive
load)
Nominal switching
capacity
Min. switching
capacity#1
Max. carrying
current
20 A 14 V DC
20 A 14 V DC
(N.O.)
10 A 14 V DC
(N.C.)
1 A 12 V DC
N.O.: 35 A (12V, at 20°C 68°F for 2 minutes)
25 A (12V, at 20°C 68°F for 1 hour)
30 A (12V, at 85°C 185°F for 2 minutes)
20 A (12V, at 85°C 185°F for 1 hour)
Mechanical
(at 120cpm)
107
Expected
life (min.
operations)
Electrical
(at rated
load)
Resistive
Motor
load
105 *1
2×105 *4
5×104 *5
105 (N.O.)*2
105 (N.C.)*3
2×105 (N.O.)*6
5×104 (N.O.)*7
2×105 (N.C.)*8
Coil
Nominal operating power
640 mW
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
*1 at 20 A 14 V DC, at 20 cpm, operating frequency: 1s ON, 9s OFF
*2 at 20 A 14 V DC, operating frequency: 1s ON, 9s OFF
*3 at 10 A 14 V DC, at 20 cpm, operating frequency: 1s ON, 9s OFF
*4 at 5 A (steady), 25 A (inrush) 14 V DC
*5 at 20 A 14 V DC (Motor lock), operating frequency: 0.5 s ON, 9.5 s OFF
*6 at 5A (steady), 25 A (inrush) 14 V DC
Characteristics
Max. operating speed (at rated load)
6 cpm
Initial insulation resistance*9
Min. 100 MΩ
(at 500 V DC)
Initial breakdown Between open contacts
voltage*10
Between contact and coil
500 Vrms for 1min.
500 Vrms for 1min.
Operate time*11 (at nominal voltage)
Max. 10 ms
(at 20°C 68°F)
Release time (without diode)*11
(at nominal voltage) (Initial)
Max. 10 ms
(at 20°C 68°F)
Shock resistance
Functional*12 Min. 100 m/s2 {10 G}
Destructive*13 Min. 1,000 m/s2 {100 G}
Vibration resistance
Functional*14
Destructive
10 Hz to 100 Hz,
Min. 44.1 m/s2 {4.5 G}
10 Hz to 500 Hz,
Min. 44.1 m/s2 {4.5 G}
Conditions in case of opera- Ambient
tion, transport and storage*15 temp.
(Not freezing and condens-
ing at low temperature)
Humidity
–40°C to +85°C
–40°F to +185°F
5% R.H. to 85% R.H.
Mass
Approx. 5 g .176 oz
*7 at 20 A 14 V DC (Motor lock)
*8 at peak 20 A 14 V DC (Braking current) operating frequency: 0.5 s ON, 9.5 s OFF
*9 Measurement at same location as “Initial break down voltage” section.
*10 Detection current: 10mA
*11 Excluding contact bounce time.
*12 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs
*13 Half-wave pulse of sine wave: 6 ms
*14 Detection time: 10 µs
*15 Refer to Conditions for operation, transport and storage mentioned in AMBIENT
ENVIRONMENT
Please inquire if you will be using the relay in a high temperature atmosphere
(110°C 230°F).
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.