JC2AF-DC24V Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – COMPACT POWER RELAYS

VDE
JC
JC RELAYS ^{COMPACT POWER RELAYS}
30.0
1.181
19.0
.748
30.4
1.197
PC board type
30.0
1.181
19.0
.748
32.4
1.276
Plug-in type
45.0
1.772
TM type
FEATURES
19.0
.748
32.9
1.295
mm inch
• High inrush current capability
1 Form A: 163 A inrush (TV-8)
2 Form A: 111 A inrush (TV-5)
• High dielectric withstanding for
transient protection:
JC can withstand 10,000 V surge in µs
between coil and contact.
• Electrical life:
1 Form A: 10⁵ ope. at 15 A 250 V AC
resistive load
2 Form A: 10⁵ ope.
at 10 A 250 V AC resistive load
• UL/CSA, VDE, TÜV, SEMKO also
approved.
SPECIFICATIONS
Contact
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
1 Form A
2 Form A
30 mΩ
(Cd free type: 100 mΩ)
Silver alloy
Contact force, min.
30 g
Rating
(resistive
load)
Expected
life (min.
operation)
Maximum switching power
Maximum switching voltage
Max. switching current
Min. switching capacity^#1
Mechanical
Electrical 10 A 250 V AC
(resistive) 5A 250 V AC
3,750 VA
2,500 VA
250 V AC
250 V AC
15 A
10 A
100 mA, 5 V DC
5×10⁶
10⁵
—
—
10⁵
Coil
Nominal operating power
900 mW
1,000 mW
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
* Specifications will vary with foreign standards certification ratings.
*¹ Measurement of same location as “Initial breakdown voltage” section
*² Detection current: 10mA
*³ Excluding contact bounce time
*⁴ Half-wave pulse of sine wave: 11ms; detection time: 10µs
*⁵ Half-wave pulse of sine wave: 6ms
*⁶ Detection time: 10µs
*⁷ Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT
Characteristics
Maximum operating speed
20 cpm.
Initial insulation resistance*¹
Min. 100 MΩ at 500 V DC
Initial
breakdown
voltage*²
Between open contacts
Between contacts sets
Between contacts and
coil
2,000 V rms for 1 min.
2,000 Vrms for 1 min.
4,000 Vrms for 1 min.
Operate time*³
(at nominal voltage)
Max. 30 ms
Release time(without diode)*³
(at nominal voltage)
Max. 10 ms
Temperature rise
(at nominal voltage)
Max. 55°C
Shock
resistance
Functional*⁴
Destructive*⁵
196 m/s² {20 G}
980 m/s² {100 G}
Vibration
resistance
Functional*⁶
Destructive
98 m/s² {10 G}, 10 to 55 Hz
at double amplitude of 1.6 mm
117.6 m/s² {12 G}, 10 to 55 Hz
at double amplitude of 2 mm
Conditions for operation, Ambient
transport and storage*⁷ temp.
(Not freezing and condens-
ing at low temperature)
Humidity
–50°C to +60°C
–58°F to +140°F
5 to 85%R.H.
Unit weight
Approx. 31 g 1.09 oz
TYPICAL
APPLICATIONS
Automatic garage door openers
Microwave ovens
Dryers
Vending machines
Copiers
Air conditioners
Stereo equipment
TV sets
ORDERING INFORMATION
Ex. JC 1a F
TM
DC12V
F
Contact
arrangement
Mounting classification
Coil voltage
Environmental support
1a: 1 Form A
2a: 2 Form A
Nil: PC board terminal
S: Plug-in terminal
TM: Top mounting
DC 5, 6, 12,
24, 48 V
F: RoHS Directive conforming type
(AgSnO2 type)
Nil: RoHS Directive non-conforming type
(AgCdO type)
(Notes) 1. TV rated types available 1 Form A: TV-8; 2 Form A: TV-5.
Notes ))2. Standard packing Carton: 50 pcs.; Case: 200 pcs.
Notes ))3. UL/CSA, VDE, TÜV, and SEMKO certified products can also be supported.
Notes )) Please consult us.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.