ET-PKV400B Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Projector Mount Bracket

SPEC
FILE
Projector Mount Bracket
ET-PKV400B
Description
This Projector Mount Bracket is used when mounting a Panasonic projector to ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKL100H/PKL100S ceiling mount bracket.
Specifications
Dimensions (W × H × D):
Weight:
Applicable ceiling mount bracket:
Applicable projector:
312.5 × 62 × 248.5 mm (12-5/16˝ × 2-7/16˝ × 9-25/32˝ )
Approx. 0.96 kg* (2.1 lbs*)
ET-PKL100H/PKL100S
PT-VZ575N/VZ570/VW535N/VW530/VX605N/VX600
PT-VX600D/VX605ND/VW530D/VW535ND/VZ570D/VZ575ND
PT-VX600T/VX605NT/VW530T/VW535NT/VZ570T/VZ575NT
PT-VX60
* ^{Average value. May differ depending on models.}
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Parts
Projector mount bracket. . . . . . . . . . . . . . . . . . . . . . 1
Screw,captive washer (M4 × 10) . . . . . . . . . . . . . . . . 4
Projector drop-prevention kit. . . . . . . . . . . . . . . . . . 1
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed installation instructions thoroughly before starting.
• Do not use an electric screwdriver or impact screwdriver to tighten screws.
Use a torque screwdriver and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
312.5
(12-5/16)
As of August 2014
SFL14A011
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
1/1