|
ET-PKT100B Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Bracket assembly | |||
|
SPEC
FILE
Bracket assembly
ET-PKT100B
ÂDescription
This bracket assembly is used when mounting a Panasonicâs applicable projector to ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKV100H/PKV100S ceiling mount bracket.
Specifications
Dimensions (W Ã H Ã D):
Weight:
Applicable ceiling mount bracket:
Applicable projector:
295 Ã 46 Ã 275 mm
(11-5/8 Ã 1-13/16 Ã 10-13/16 inches)
Approx. 1.9 kg* (4.2 lbs*)
ET-PKV100H/PKV100S
PT-TW231R/TW230
* Average value. May differ depending on models.
Parts
Projector mount bracket (bracket assembly) . . . . 1
Washer-fitted hexagonal bolts (M4 Ã 12) . . . . . . . 4
Washer-fitted hexagonal bolts (M5 Ã 18) . . . . . . . 5
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Caution:
⢠Mounting should be done by a qualified technician.
⢠Make sure that the mounting (ceiling) area has sufficient strength.
⢠Read the enclosed mounting instructions thoroughly before starting.
⢠Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
⢠When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
275 (10-13/16 )
unit :âmm (inch)
NOTE: This illustration is not drawn to scale.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
As of February 2012
SFL12A002
1/1
|