ET-PKL100S Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Ceiling mount bracket for low ceilings

Ceiling mount bracket for low ceilings
ET-PKL100S
Description
This ceiling mount bracket is to be used when mounting projectors to low ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications
Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W × H × D):
Weight:
Applicable bracket assembly:
+5°, -15°
±10°*¹
±5°
160 × 76 × 150 mm (6-5/16× 3 × 5-29/32 inches)
0.7 kg*² (1.5 lbs)*²
ET-PKL420B/PKL430B/PKV400B
*¹ Correction angle when using together with the PKL420B/PKL430B/PKV400B.
*² Average value. May differ depending on models.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hex head bolt,captive washer(M6 × 12) . . . . . . . . 4
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed Installation instructions thoroughly before starting. The instructions for installing the drop-
prevention wire are given in the Installation Instructions for the base mount bracket.
• Do not use an electric screwdriver or impact driver to tighten screws.
Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
(ø47-/ø1161) .5
25
(31/32)
142
(5-19/32)
160
(6-5/16)
As of May 2014
SFL14A013
150
(5-29/32)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
1/3