ET-PKL100H Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Ceiling mount bracket for high ceilings

Ceiling mount bracket for high ceilings
ET-PKL100H
Description
This ceiling mount bracket is to be used when mounting projectors to high ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications
Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W × H × D):
Weight:
Applicable bracket assembly:
+5°, -20°
±10°*¹
±5°
150 × 293– 373 × 160 mm (5-29/32 × 11-17/32–14-11/16 × 6-5/16 inches)
1.8 kg*² (4.0 lbs)*²
ET-PKL420B/PKL430B/PKV400B
*¹ Correction angle when using together with the PKL420B/PKL430B/PKV400B.
*^{2 Average value. May differ depending on models.}
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 × 16) . . . . . . . 19
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed Installation instructions thoroughly before starting. The instructions for installing the drop-
prevention wire are given in the Installation Instructions for the base mount bracket.
• Do not use an electric screwdriver or impact driver to tighten screws.
Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
4(-øø71/11.65)
132
(5-3/16)
As of May 2014
SFL14A012
150
(5-29/32)
160
(6-5/16)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
1/3