ET-PKD130H Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – High-ceiling mount bracket (6-axis adjustment mechanism)

High-ceiling mount bracket (6-axis adjustment mechanism)
ET-PKD130H
Description
This bracket is a special mount bracket with a 6-axis adjustment mechanism which is useful for installing the ET-DLE030 to applicable
Panasonic projectors to enable short focal-length projection.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications
Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Horizontal slide amount
Forward-back slide amount
Vertical slide amount
Dimensions (W × H × D):
Weight:
Applicable bracket assembly:
Applicable projectors
±5°
±5°
±5°
±50 mm
±50 mm
±50 mm
380 × 329– 489 × 308 mm (14-31/32 × 12-15/16–19-1/8 × 12-1/8 inches)
10 kg*
ET-PKD130B/PKD120B
[Group A]
PT-DZ870K/DZ870W/DZ870LK/DZ870LW/
DW830K/DW830W/DW830LK/DW830LW/DX100K/DX100W/DX100LK/DX100LW
[Group B]
PT-DZ770S/DZ770K/DZ770LS/DZ770LK/
DW740S/DW740K/DW740LS/DW740LK/DX810S/DX810K/DX810LS/DX810LK/
DZ680S/DZ680K/DZ680LS/DZ680LK/
DW640S/DW640K/DW640LS/DW640LK/DX610S/DX610K/DX610LS/DX610LK/
DZ6710/DZ6710L/
DW730S/DW730K/DW730LS/DW730LK/DX800S/DX800K/DX800LS/DX800LK/
DZ6700/DZ6700L/DW6300S/DW6300K/DW6300LS/DW6300LK/
D6000S/D6000K/D6000LS/D6000LK/D5000S/D5000LS
* Average value. May differ depending on models.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjustment pole unit . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjustment unit . . . . . . . . . . . . . . . . . . . . . . . . 1
Pole support bracket 1 . . . . . . . . . . . . . . . . . . . . . . . 1
Pole support bracket 2 . . . . . . . . . . . . . . . . . . . . . . . 1
Adjustment knob bracket . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 × 80) . . . . . . . . . 2
Washer-fitted bolts (M6 × 16) . . . . . . . . . . . . . . . . . . 26
Hexagonal head bolt (M8×130) . . . . . . . . . . . . . . . . . 2
Plain washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . . . . . . . . 2
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. (Use a torque driver or similar tool.)
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
As of September 2013
1/2
SFL13A002