ET-PKD120B Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Bracket assembly

SPEC
FILE
Bracket assembly
ET-PKD120B
Description
This bracket assembly is used when mounting a Panasonic projector to ceilings.
Specifications
Dimensions (W × H × D):
Weight:
Applicable ceiling mount bracket:
Applicable projector:
380 × 56 × 362 mm
(14-31/32 × 2-7/32 × 14-1/4 inches)
Approx. 2.5 kg* (5.5 lbs*)
ET-PKD120H/PKD120S/PKD310H/PKD310S/PKD100H/
PKD100S/PKD77H/PKD75S/PKD56H/PKD55S
PT-DZ870K/DZ870LK/DZ870W/DZ870LW/DW830K/DW830LK/
DW830W/DW830LW/DX100K/DX100LK/DX100W/DX100LW
* Average value. May differ depending on models.
Parts
Projector mount bracket (bracket assembly) . . . . 1
Washer-fitted screws (M6 × 16) . . . . . . . . . . . . . . 6
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
380 (14-31/32)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of May 2013
SFD13A004
1/1