ET-PFD310 Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Frame

SPEC
Frame
FILE
ET-PFD310
Description
This frame is designed especially for use on the Panasonic’s applicable projector. The frame can also be used for a
dual stack configuration in which two projectors are used together.
Specifications
Dimensions (W × H × D):
Weight*:
Applicable projector:
596 × 322.5 × 656 mm
(23-15/32 × 12-11/16 × 25-13/16 inches)
Approximately 8.7 kg (19.2 lbs)
PT-DZ13K/DS12K/DW11K/DZ10K/DZ8700/DS8500/
DW8300/DZ110X/DS100X/DW90X
* ^{Average value. May differ depending on the actual unit.}
Parts
Frame (already assembled) . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 × 16) . . . . . . 5
Spring washers (M10) . . . . . . . . . . . . . . . . . . . . . 8
Hex bolts (M10 × 110) . . . . . . . . . . . . . . . . . . . . 4
Washers (M10) . . . . . . . . . . . . . . . . . . . . . . . . . 16
Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . . . . . . 8
Adjustment nuts (M10) . . . . . . . . . . . . . . . . . . . . 4
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
Illustration shows the frame attached to a projector.
596 (23-15/32)
610 (24-1/32)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of April 2013
SFD10A009-1
1/1