ELJFA100JF Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – 3. General use FC, FA, FB

3. General use FC, FA, FB
Fixed Inductors (Chip Inductors)
Japan
China
■ Features
˔ General use wire wound and resin molded chip inductor.
˔ Corespond to Re-flowsoldering and flow soldering.
˔ Wide line-up from 2520 size to 4532 size.
˔ Good for mounting.
■ Recommended Applications
˔ AV equipment, Wireless communication equipment and various general electronic equipment.
■ Explanation of Part Numbers
1
2
3
4
ELJF
Product code
Chip Inductors
Shape
FC 2520
FA 3225
FB 4532
5
6
7
8
9
10
11
A1R2KF2
Packaging Design No.
Inductance
R22 220 nH
3R3 3.3 µH
470 47 µH
561 560 µH
102 1000 µH
Inductance tolerance
J
±5 %
K
±10 %
M
±20 %
F
Taping
˙Storage condition
˔ Package
: Normal temperature (–5 to 35 °C), normal humidity (85 %RH Max.), shall not be exposed to
direct sunlight and harmful gas and care should be taken so as not to cause dew.
˔ Product on PWB : Temperature –20 to +85 °C
˙Storage period
˔ In generally, even if storage condition is good, solderability will be down cause of time progress.
Please use product within 6 months after received.
(In case of over 6 months storage period, use the product after confirmation of no abnormality of appearance and
solderability.)
˙Packaging
Refer 28 ro 29 page.
˙Soldering condition
Refer 30 page.
˙Caution for use
Refer 31 page.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006