ELJEA3R3KF Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Fixed Inductors (Chip Inductors)

6. Low DC Resistance Type EA
Fixed Inductors (Chip Inductors)
■ Features
˔ Low DCR, suitable for power circuitry.
˔ Magnetic shield effect using ferrite mixed outer molding.
˔ Capable of being Re-flow or flow soldered.
˔ Good for mounting.
■ Recommended Applications
˔ AV equipment, Wireless communication equipment and various types of general electronic equipment.
■ Explanation of Part Numbers
1
2
EL
Product code
Chip Inductors
3
4
5
6
7
8
9
10
11
J EA 1 R 5 KF
Packaging Design No.
Type
EA 3225 (1210)
Size : mm (inch)
Inductance
3R3 3.3 µH
470 47 µH
561 560 µH
Inductance tolerance
K
±10 %
M
±20 %
F
Taping
˙ Storage Conditions
˔ Package
: Normal temperature (–5 to 35 °C), normal humidity (85 %RH max.), shall not be exposed to
direct sunlight and harmful gases and care should be taken so as not to cause dew.
˔ Operating Temperature : –20 to +85 °C
˙ Storage Period
˔ Solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation
of tin-plated terminals. Even if storage conditions are within specified limits, solderability may be reduced with the
passage of time. Therefore, please control the storage conditions and try to use the product within 6 months of receipt.
˙ Packaging
Refer 27 and 28 page.
˙ Soldering Conditions
Refer 29 page.
˙ Safety Precautions
Refer 30 page.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008