ELJDA680JF Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Signal Processing Use (Low Distortion Type) DA, FA***D

Fixed Inductors (Chip Inductors)
7. Signal Processing Use (Low Distortion Type) DA, FA***D
■ Features
˔ General use wire wound and resin molded chip inductor.
˔ Low distortion type suitable for Signal processing.
˔ 2 line-up of Super low distortion series and low distortion type.
˔ Good mounting characteristic.
■ Recommended Applications
˔ All kinds of Broadband Modem, Router and STB etc.
˔ Corresponds to sam IC chipset.
ELJDA
ELJFA
■ Explanation of Part Numbers
˔ Super Low Distortion type
1
2
3
4
5
6
EL JDA6
Product code
Chip Inductors
Shape
DA 3225 (1210)
Size : mm (inch)
Inductance
390 39 µH
470 47 µH
560 56 µH
680 68 µH
820 82 µH
101 100 µH
7
8
9
10
11
80JF
Packaging Design No.
Inductance tolerance
J
±5 %
F
Taping
˔ Low Distortion type
1
2
3
4
5
6
7
8
9
10
11
ELJFA6 8 0 JFD
Packaging Design No.
Product code
Chip Inductors
Shape
FA 3225 (1210)
Size : mm (inch)
Inductance
390 39 µH
470 47 µH
560 56 µH
680 68 µH
820 82 µH
101 100 µH
Inductance tolerance
J
±5 %
F Taping
Low
D distortion
type
˙Storage Conditions
˔ Package
: Normal temperature (–5 to 35 °C), normal humidity (85 %RH max.), shall not be exposed to
direct sunlight and harmful gases and care should be taken so as not to cause dew.
˔ Operating Temperature : –20 to +85 °C
˙Storage Period
˔ Solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation
of tin-plated terminals. Even if storage conditions are within specified limits, solderability may be reduced with the
passage of time. Therefore, please control the storage conditions and try to use the product within 6 months of receipt.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Nov. 2009