EEVEB2C100Q_16 Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : EB (Large Can Size) Type : V
Features
● _{Endurance : 105 °C 3000 h to 5000 h}
● _{RoHS compliant}
Specifications
Category temperature range
–25 °C to +105 °C
Rated voltage range
160 V.DC to 450 V.DC
Capacitance range
2.2 µF to 100 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.06 CV +10 (µA) After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
Characteristics
V.DC
160 200 250 350 400 450
at low temperature Z(–25 °C) / Z(+20 °C) 2 2 3 5 6 6
(Impedance ratio at 120 Hz)
After the life test with DC rated working voltage at +105 °C±2 °C for 5000 hours, the capacitors
shall meet the limits specified below. (Size code G13 : 3000 hours, G17 : 4000 hours)
Endurance
Capacitance change Within ±20 % of the initial value
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Capacitance change Within ±10 % of the initial value
soldering heat
tan d
Within the initial limit
DC leakage current Within the initial limit
Frequency correction factor for ripple current
Frequency (Hz)
Rated Voltage (V.DC)
160 to 250
350 to 450
120
0.55
0.50
1k
0.85
0.80
10 k < f < 30 k
0.90
0.90
30 k < f < 100 k
1.00
1.00
Marking
Example : 160 V.DC 10 µF
Marking color : BLACK
Negative polarity
marking (–)
Capacitance (µF)
10
2C EB
Series identification
Lot number
Rated voltage code
R. Voltage
(V.DC)
160
200
250
350
400
450
Code 2C 2D 2E 2V 2G 2W
Dimensions
0.3 max.
A±0.2
–
L
Pressure Relief
+
W
( ) Reference size
(Unit : mm)
Size
code
0D
L
A,B H
I
W
P
K
G13 10.0 13.5±0.5 10.3 12.0 max. 3.5 0.9±0.2 4.6 0.70±0.20
G17 10.0 16.5±0.5 10.3 12.0 max. 3.5 0.9±0.2 4.6 0.70±0.20
H16 12.5 16.5±0.5 13.5 15.0 max. 4.7 0.9±0.2 4.4 0.70±0.30
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.2±0.3 6.7 0.70±0.30
J21 16.0 21.5±0.5 17.0 19.0 max. 5.5 1.2±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.2±0.3 6.7 0.70±0.30
K21 18.0 21.5±0.5 19.0 21.0 max. 6.7 1.2±0.3 6.7 0.70±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2016