EEVEB2C100Q Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Surface Mount Type

Aluminum Electrolytic Capacitors/ EB(Large Can Size)
Surface Mount Type
Series: _{EB (Large Can Size)} Type: _V
■ Features
● Endurance : 105 °C 3000 h to 5000 h
● RoHS directive compliant
■ Specifications
Category Temp. Range
–25 °C to +105 °C
Rated W.V. Range
160 V.DC to 450 V.DC
Nominal Cap. Range
2.2 µF to 100 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.06 CV +10 (µA) After 2 minutes
tan δ
Please see the attached standard products list
Characteristics
at Low Temperature
W.V. (V)
160 200 250 350 400 450
Z(–25 °C) / Z(+20 °C) 2
2
3
5
6
6
(Impedance ratio at 120 Hz)
After the life test with DC rated working voltage at +105 °C±2 °C for 5000 hours, the capacitors shall meet
the limits specified below. (Size code G13 : 3000 hours, G17 : 4000 hours)
Endurance
Capacitance change ±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change ±10 % of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
■ Marking
Example : 160 V 10 µF
Rated Voltage Mark
Negative polarity
marking (–)
10
2C EB
Capacitance (µF)
Series identification
Rated Voltage Mark
2C
160 V
2D
200 V
2E
250 V
2V
350 V
2G
400 V
2W
450 V
Lot number
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
( )reference size
L±0.5
+
W
(mm)
Size
code
D
L A,B H max. I
W
P
K
G13 10.0 13.5 10.3 12.0 3.5 0.9±0.2 4.6 0.70±0.20
G17 10.0 16.5 10.3 12.0 3.5 0.9±0.2 4.6 0.70±0.20
H16 12.5 16.5 13.5 15.0 4.7 0.9±0.2 4.4 0.70±0.30
J16 16.0 16.5 17.0 19.0 5.5 1.2±0.3 6.7 0.70±0.30
J21 16.0 21.5 17.0 19.0 5.5 1.2±0.3 6.7 0.70±0.30
K16 18.0 16.5 19.0 21.0 6.7 1.2±0.3 6.7 0.70±0.30
K21 18.0 21.5 19.0 21.0 6.7 1.2±0.3 6.7 0.70±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EE75 –
01 Nov. 2008