EEV-TG1H331Q Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ TG

Aluminum Electrolytic Capacitors/ TG
Surface Mount Type
Series: _TG Type: _V
■ Features
● Endurance:125 °C 1000 h to 2000 h
● Miniaturization (40 % less than TA Series)
● Low ESR (Low temp)
● Vibration-proof product is available upon request. (08 mm and larger)
● AEC-Q200 qualified^✽
● RoHS directive compliant (Parts No 08 to 010 : EEE✽, 012.5 to 018 : EEV✽)
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
Characteristics
at Low Temperature
W.V. (V)
Z(–25 °C)/Z(+20 °C)
Z(–40 °C)/Z(+20 °C)
–40 °C to +125 °C
10 V.DC to 100 V.DC
10 μF to 4700 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
Please see the attached standard products list
10 16 25 35 50 63 80 100
3
2
2
2
2
2
2
2 (Impedance ratio at 120 Hz)
6
4
4
3
3
3
3
3
After applying rated working voltage for 1000 hours (08×6.2), 2000 hours (08×10.2<) at +125 °C±2 °C and then
being stabilized at +20 °C, capacitors shall meet the following limits.
Endurance
Capacitance change
tan d
DC leakage current
±30 % of initial measured value (code U : ±35 %)
< 300 % of initial specified value (code U : ±350 %)
< initial specified value
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan d
< initial specified value
DC leakage current < initial specified value
■ Frequency correction factor for ripple current
Correction factor
120
0.65
Frequency (Hz)
1k
10 k
0.85
0.95
100 k to
1.00
■ Marking
Example : 10 V 100 μF, 10 V 1000 μF
Marking coloc : BLACK
Lead-Free products (< 010)
Negative polarity
marking (–)

" 5(
Capacitance (μF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Lot number
Rated Voltage Mark
Lead-Free products (> 012.5)
Negative polarity
marking (–)

" 5(
Capacitance (μF)
Series identification
■ Dimensions in mm (not to scale)
(Unit : mm)
0.3 max.
A±0.2
–
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
Lot number
Rated Voltage Mark
A
10 V
C
16 V
E
25 V
V
35 V
Rated Voltage Mark
H
50 V
J
63 V
K
80 V
2A
100 V
Size
code
D
L
A, B
H
I
E 8.0 6.2±0.3 8.3 9.5 max. 3.4
F 8.0 10.2±0.3 8.3 10.0 max. 3.4
G 10.0 10.2±0.3 10.3 12.0 max. 3.5
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7
W
0.65±0.1
0.90±0.2
0.90±0.2
0.90±0.3
1.20±0.3
1.20±0.3
P
K
2.2
0.35
+
-
0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
4.4 0.70±0.30
6.7 0.70±0.30
6.7 0.70±0.30
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Mar. 2014
– EEE-50 –