EEV-FK1V681Q Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FK

Surface Mount Type
Series: _FK Type: _V
Aluminum Electrolytic Capacitors/ FK
■ Features
● Endurance: 2000 h to 5000 h at 105 °C
● Low impedance (40 % to 60 % less than FC series)
Miniaturized (30 % to 50 % less than FC series)
● Vibration-proof product is available upon request. (08 mm and larger)
● AEC-Q200 qualified^✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
DC Leakage Current
tan d
Characteristics
at Low Temperature
Endurance
Shelf Life
Resistance to
Soldering Heat
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
3.3 μF to 6800 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
Please see the attached standard products list
W.V. (V)
6.3 10 16 25 35 50 63 80 100
Z(–25 °C)/Z(+20 °C) 2
Z(–40 °C)/Z(+20 °C) 3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
(Impedance ratio at 120 Hz)
Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 3 3 3 3
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits. ( > 012.5 and suffix “G” in 08×10.2, 010×10.2 are 5000 hours)
Capacitance change
±30 % of initial measured value (Suffix “G” is 35 %)
tan d
< 200 % of initial specified value (Suffix “G” is 300 %)
DC leakage current
< initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
±10 % of initial measured value
tan d
< initial specified value
DC leakage current
< initial specified value
■ Frequency correction factor for ripple current
Correction factor
50, 60
0.70
Frequency (Hz)
120
1k
10 k
0.75
0.90
0.95
100 k to
1.00
■ Marking
Example:6.3 V 22 μF, 6.3 V 3300 μF
Marking color : BLACK
< 010
Negative polarity
marking (–)
Capacitance (μF)

Series identification
K ',
Mark for Lead-Free
Products Black Dot
(Square)
Lot number
Rated Voltage Mark
> 012.5
Negative polarity
marking (–)

K ',
Capacitance (μF)
Series identification
Lot number
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
Rated Voltage Mark
H
50 V
J
63 V
K
80 V
2A
100 V
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
(Unit : mm)
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
D
B 4.0
C 5.0
D 6.3
D8 6.3
E 8.0
L
A,B
5.8±0.3 4.3
5.8±0.3 5.3
5.8±0.3 6.6
7.7±0.3 6.6
6.2±0.3 8.3
H
I
W
P
K
5.5 max. 1.8
0.65±0.1
1.0
0.35
+
-
1.5
0.2
6.5 max. 2.2
0.65±0.1
1.5
0.35
+
-
1.5
0.2
7.8 max. 2.6
0.65±0.1
1.8
0.35
+
-
1.5
0.2
7.8 max. 2.6
0.65±0.1
1.8
0.35
+
-
1.5
0.2
9.5 max. 3.4
0.65±0.1
2.2
0.35
+
-
1.5
0.2
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Mar. 2014
– EEE-41 –