EEV-EB2D101M Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ EB(Large Can Size)

Aluminum Electrolytic Capacitors/ EB(Large Can Size)
Surface Mount Type
Series: _{EB (Large Can Size)} Type: _V
■ Features
● Endurance : 105 °C 3000 h to 5000 h
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
Characteristics
at Low Temperature
W.V. (V)
160
Z(–25 °C) / Z(+20 °C) 2
–25 °C to +105 °C
160 V.DC to 450 V.DC
2.2 µF to 100 µF
±20 % (120 Hz/+20 °C)
I < 0.06 CV +10 (µA) After 2 minutes
Please see the attached standard products list
200 250 350 400 450
2
3
5
6
6
(Impedance ratio at 120 Hz)
After the life test with DC rated working voltage at +105 °C±2 °C for 5000 hours, the capacitors shall meet
the limits specified below. (Size code G13 : 3000 hours, G17 : 4000 hours)
Endurance
Capacitance change ±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
■ Frequency correction factor for ripple current
Rated Voltage (V.DC)
160 to 250
350 to 450
120
0.55
0.50
Frequency (Hz)
1k
10 k < f < 30 k
0.85
0.90
0.80
0.90
30 k < f < 100 k
1.00
1.00
■ Marking
Example : 160 V 10 µF
Negative polarity
marking (–)
Capacitance (µF)
10
2C EB
Series identification
Lot number
Rated voltage Mark
Rated Voltage Mark
2C
160 V
2D
200 V
2E
250 V
2V
350 V
2G
400 V
2W
450 V
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
(Unit : mm)
+
L
Pressure Relief (φ10 and larger)
W
( ) Reference size
Size
code
D
L
A,B
H
I
W
P
K
G13 10.0 13.5±0.5 10.3 12.0 max. 3.5 0.9±0.2 4.6 0.70±0.20
G17 10.0 16.5±0.5 10.3 12.0 max. 3.5 0.9±0.2 4.6 0.70±0.20
H16 12.5 16.5±0.5 13.5 15.0 max. 4.7 0.9±0.2 4.4 0.70±0.30
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.2±0.3 6.7 0.70±0.30
J21 16.0 21.5±0.5 17.0 19.0 max. 5.5 1.2±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.2±0.3 6.7 0.70±0.30
K21 18.0 21.5±0.5 19.0 21.0 max. 6.7 1.2±0.3 6.7 0.70±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-61 –
00 Nov. 2012