EEUTP1E221 Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial Lead Type
Series : TP Type : A
Features
● _{Endurance : 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h}
● _{Smaller than series TA}
● _{High ripple current (at high frequency) : 20 to 40% higher than TA series}
● _{RoHS compliant}
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor
(tan d)
V.DC
tan d
–40 °C to + 135 °C
25 V .DC to 35 V .DC
100 µF to 5100 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
25 35
0.14 0.12
(120Hz / +20 °C)
For capacitance value > 1000 µF , add 0.02 per every 1000 µF.
Endurance 1
After following life test with DC voltage and +125 °C±2 °C ripple current value applied. (The
sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the
capacitors are restored to 20 °C, the capacitors shall meet the limits specified below.
Duration
08 : 2000 hours, 010 : 3000 hours, 012.5 : 4000 hours, 016 to 018 : 5000 hours
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
DC leakage current Within the initial limit
Endurance 2
After following life test with DC voltage and +135 °C±2 °C ripple current value applied. (The
sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the
capacitors are restored to 20 °C, the capacitors shall meet the limits specified below.
Duration
08 : 1000 hours, 010 to 018 : 2000 hours
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
DC leakage current Within the initial limit
Shelf Life 1
Shelf Life 2
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After storage for 1000 hours at +135 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Rated voltage
Capacitance
(V.DC)
(µF)
60
to 330
0.55
25 to 35
390 to 1000
0.70
1200 to
0.75
120
0.65
0.75
0.80
Frequency (Hz)
1k
0.85
0.90
0.90
10 k
0.90
0.95
0.95
100 k
1.00
1.00
1.00
Dimensions
Pressure relief
Sleeve
08
+
–
010 <
L^✽
✽ L < 16 : L±1.5
L > 20 : L±2.0
14 min. 3 min.
0D±0.5
0D±0.5
(Unit : mm)
0D
8
10
12.5
16
18
0d
0.6
0.6
0.6
0.8
0.8
F
3.5
5.0
5.0
7.5
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2016