EEUTA1A331_16 Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial Lead Type
Series : TA Type : A
Features
● _{Endurance: 125 °C 2000 h}
● _{Heat cycle: 1000 cycle –40 °C to +125 °C}
● _{RoHS compliant}
Specifications
Category temperature range
–40 °C to + 125 °C
Rated voltage range
10 V .DC to 63 V .DC
Capacitance range
2.2 µF to 4700 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Dissipation factor
(tan d)
V.DC
tan d
10 16 25 35 50 63
0.20 0.16 0.14 0.12 0.10 0.09
(120Hz / +20 °C)
For capacitance value > 1000 µF , add 0.02 per every 1000 µF.
Endurance
After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours,
when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specified below.
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Rated voltage
Capacitance
(V.DC)
(µF)
60
1 to 330
0.55
10 to 63
470 to 1000
0.70
2200 to 4700
0.75
120
0.65
0.75
0.80
Frequency (Hz)
1k
0.85
0.90
0.90
10 k
0.90
0.95
0.95
100 k
1.00
1.00
1.00
Dimensions
Pressure relief
Sleeve
+
–
L^✽
14 min. 3 min.
✽ L < 16 : L±1.0 (016×15, 018×15 : L±1.5)
L > 20 : L±2.0
0D
8
10
0d
0.6
0.6
F
3.5
5.0
08
0D±0.5
12.5
0.6
5.0
010 <
0D±0.5
(Unit : mm)
16
18
0.8
0.8
7.5
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2016