EEUFS0J221B Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors (Radial Lead Type)

Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial Lead Type
Series : FS Type : A
Features
● _{Low ESR, Miniaturized (1 size smaller than series FR)}
● _{Endurance : 105 °C 5000 h to 10000 h}
● _{RoHS compliant}
Country of origin
● _Malaysia
Specifications
Category temperature range
–40 °C to +105 °C
Rated voltage range
6.3 V.DC to 50 V.DC
Capacitance range
27 µF to 10000 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV (µA) After 2 minutes
Dissipation factor
(tan d)
V.DC
tan d
6.3 10 16 25 35 50
0.22 0.19 0.16 0.14 0.12 0.10
(max.) (120 Hz/+20 °C)
Add 0.02 per 1000 µF for products of 1000 µF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The
sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the
capacitors are restored to 20 °C, the capacitors shall meet the limits specified below.
Duration
05×11/ 06.3×11.2 : 5000 hours, 08×11.5/ 010×12.5 : 6000 hours
08×15/ 010×16 : 8000 hours, 08×20 : 9000 hours
010×20 to 010×25/ 012.5×20 to 012.5×35/ 016×20 to 016×25 : 10000 hours
Capacitance change Within ±25 % of the initial value (6.3 V.DC to 10 V.DC : ±30 %)
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Frequency correction factor for ripple current
Rated voltage (V.DC)
6.3 to 50
Capacitance (µF)
27
47
390
1200
to
33
to 330
to 1000
to 10000
60
0.45
0.60
0.65
0.75
120
0.55
0.70
0.75
0.80
Frequency (Hz)
1k
0.75
0.85
0.90
0.95
10 k
0.90
0.95
0.98
1.00
100 k to
1.00
1.00
1.00
1.00
Dimensions
Pressure relief
06.3 <
Sleeve
+
–
L^✽
✽ _{L < 16 : L±1.5}
L > 20 : L±2.0
14 min. 3 min.
0D
5
6.3
8
L
—
—
—
0d
0.5
0.5
0.6
F
2.0
2.5
3.5
< 08
010 <
0D±0.5
0D±0.5
10
12.5
—
12.5 to 25 30 to 35
0.6
0.6
0.8
5.0
5.0
5.0
(Unit : mm)
16
—
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 May. 2017