EEUFM0J151_16 Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial Lead Type
Series : FM Type : A
Features
● _{Low impedance (40 % to 70 % less than FC Series)}
● _{Endurance : 105 °C 2000 h to 7000 h}
● _{RoHS compliant}
Attention
● Not applicable for automotive
Specifications
Category temperature range
–40 °C to +105 °C
Rated voltage range
6.3 V.DC to 50 V.DC
Capacitance range
22 µF to 6800 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV (µA) After 2 minutes
Dissipation factor
(tan d)
V.DC
tan d
6.3 10 16 25 35 50
0.22 0.19 0.16 0.14 0.12 0.10
(max.) (120 Hz/+20 °C)
Add 0.02 per 1000 µF for products of 1000 µF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The
sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the
capacitors are restored to 20 °C, the capacitors shall meet the limits specified below.
Duration
05 to 06.3 : 2000 hours, 08×11.5 to 08×15: 3000 hours
08×20 to 010×16 : 4000 hours, 010×20 to 012.5×20/ 016×20 : 5000 hours
012.5×25 to 012.5×35/ 016×25 : 7000 hours
Capacitance change Within ±25 % of the initial value (6.3 V.DC to 10 V.DC : ±30 %)
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Frequency correction factor for ripple current
Rated voltage (V.DC)
6.3 to 50
Capacitance (µF)
22
47
390
1200
to
33
to 330
to 1000
to 6800
60
0.45
0.60
0.65
0.75
120
0.55
0.70
0.75
0.80
Frequency (Hz)
1k
0.75
0.85
0.90
0.95
10 k
0.90
0.95
0.98
1.00
100 k
1.00
1.00
1.00
1.00
Dimensions
Pressure relief
06.3 <
Sleeve
+
–
L^✽
✽ _{L < 16 : L±1.5}
L > 20 : L±2.0
14 min. 3 min.
0D
5
6.3
8
L
—
—
—
0d
0.5
0.5
0.6
F
2.0
2.5
3.5
< 08
010 <
0D±0.5
10
—
0.6
5.0
0D±0.5
12.5
12.5 to 25 30 to 40
0.6
0.8
5.0
(Unit : mm)
16
—
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2016