EEUEB1A101S_16 Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial Lead Type
Series : EB Type : A
Features
● _{Endurance : +105 °C 5000 h to 10000 h}
● _{Hight ripple hight frequency (Hight Voltage)}
● _{RoHS compliant}
Specifications
Category temperature range
–40 °C to +105 °C
–25 °C to +105 °C
Rated voltage range
10 V.DC to 63 V.DC
160 V.DC to 450 V.DC
Capacitance range
2.2 µF to 3300 µF
10 µF to 330 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV or 3 (µA)
After 2 minutes application of rated working voltage at +20 °C (Whichever is greater)
Dissipation factor (tan d)
Please see the attached characteristics list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The
sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the
capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.
Endurance
(10 V.DC to 63 V.DC)
Duration : 05×11 to 08×11.5 : 5000 hours 08×15 to 012.5×25 : 10000 hours
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
DC leakage current Within the initial limit
Shelf life
(160 V.DC to 450 V.DC)
Duration : 5000 hours
Capacitance change Within ±20 % of the initial value
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Frequency correction factor for ripple current
(10 V.DC ~ 63 V.DC)
Capacitance
(µF)
2.2 to 10
22 to 470
1000 to 3300
Frequency (Hz)
60 120 1 k 10 k 100 k
0.75 1.00 1.40 1.55 1.65
0.85 1.00 1.20 1.25 1.30
0.95 1.00 1.05 1.10 1.15
Rated voltage
(V.DC)
120
160 to 250 0.55
350 to 450 0.50
Dimensions
Frequency (Hz)
1 k 10 k to 30k 30 k to 100k
0.85
0.90
1.00
0.80
0.90
1.00
Pressure relief
06.3 <
Sleeve
+
–
L^✽
14 min. 3 min.
✽ L < 16 : L±1.0 (08×15 only L±1.5)
L > 20 : L±2.0
0D
5
6.3
8
0d
0.5
0.5
0.6
F
2.0
2.5
3.5
< 08
010 <
0D±0.5
0D±0.5
10
12.5
16
0.6
0.6
0.8
5.0
5.0
7.5
(Unit : mm)
18
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2016