EEUEB1A101 Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitor/EB

Aluminum Electrolytic Capacitor/EB
Radial Lead Type
Series: _EB Type : _A
n Features Endurance:105°C 5000 to 10000 h
High Ripple High Frequency(High Voltage)
Country of Origin
Japan
Malaysia
China
n Specifications
Category temp. range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
-40 to + 105°C
-25 to + 105°C
10 to 63 V .DC
160 to 450 V .DC
0.47 to 3300 µ F
10 to 330 µ F
±20 % (120Hz/+20°C)
I < 0.01 CV or 3(µ A)
after 2 minutes application of rated working
voltage at +20°C(Whichever, greater)
I < 0.06 CV + 10(µ A)
application of rated working voltage at +20°C
after 2 minutes
tan d
Endurance
Please see the attached standard products list
After following life test with DC voltage and +105±2°C ripple current value applied (The sum of
DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall
meet the limits specified bellow.
(10 to 63V.DC )
Duration : 5000 hours (f5´11 to 8´11.5), 7000hours (f5´15 to f6.3´15)
10000 hours (f8´15 to 12.5´25) Post test requirement at +20 °C
Capacitance change ±30% of initial measured value
tan d
< 300 % of initial specified value
DC leakage current < initial specified value
Shelf Life
(160 to 450V.DC )
Duration : 5000hours
Capacitance change ±20% of initial measured value
tan d
< 200 % of initial specified value
DC leakage current < initial specified value
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
n Frequency corection factor for ripple current
(10 to 63 V. DC )
Capacitance
(µF)
0.47 to 10
22 to 470
1000 to 3300
60
0.75
0.85
0.95
Frequency(Hz)
120 1k 10k
1 1.40 1.55
1 1.20 1.25
1 1.05 1.10
100k
1.65
1.30
1.15
(160 to 450 V. DC )
W.V.(V.DC)
160 to 250
350 to 450
120
0.55
0.50
Frequency(Hz)
1k
10k to 30k 30k to100k
0.85 0.90 1.00
0.80 0.90 1.00
n Dimensions in mm (not to scale)
Sleeve
(>6. 3 mm dia)
Vent
fd±0.05
f10<
f8>
Li
L <16:L+1.0 max 14 min
3 min
L >20:L+2.0 max
if 8 ´ 15:L+1.5max
fD+0.5 max
fD+0.5 max
Body Dia. fD ⁵
6.3
Lead Dia. fd 0.5 0.5
Lead space P ^{2.0 2.5}
8
10 12.5
0.6 0.6 0.6
3.5 5.0 5.0
16 18
0.8 0.8
7.5 7.5
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately.
¾ EE79 ¾