EEU-FR1V152S Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FR

Radial Lead Type
Series: _FR Type: _A
■ Features
● Low ESR (Same as FM Series)
● Endurance : 2000 h to 10000 h at +105 °C
● RoHS directive compliant
Aluminum Electrolytic Capacitors/ FR
■ Country of origin
Malaysia
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
–40 °C to +105 °C
6.3 V.DC to 50 V.DC
22 µF to 8200 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
W.V.
6.3 10 16 25 35 50
tan δ
0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 µF for products of 1000 µF or more.
(120 Hz/+20 °C)
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specified below.
Duration
φ5҂11/ φ6.3҂11.2 : 2000 hours, φ8҂11.5/ φ10҂12.5 : 6000 hours
φ8҂15/ φ10҂16 : 8000 hours, φ8×20 : 9000 hours
φ10҂20 to φ10҂25/ φ12.5҂20 to φ12.5҂35/ φ16҂20 to φ16҂25 : 10000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 50
Cap (µF)
22
47
390
1200
to
33
to 330
to 1000
to 8200
60
0.45
0.60
0.65
0.75
120
0.55
0.70
0.75
0.80
Frequency (Hz)
1k
0.75
0.85
0.90
0.95
10 k
0.90
0.95
0.98
1.00
100 k
1.00
1.00
1.00
1.00
■ Dimensions in mm (not to scale)
Pressure relief
φ6.3<
Sleeve
φd±0.05
+
<φ8
–
[mm]
φ10<
L^✽
✽ _{L<16 : L±1.5}
L>20 : L±2.0
14 min. 3 min.
Body Dia. φD
Body Length L
Lead Dia. φd
Lead space F
5
6.3
8
—
—
—
0.5
0.5
0.6
2.0
2.5
3.5
φD±0.5
φD±0.5
10
12.5
—
12.5 to 25 30 to 35
0.6
0.6
0.8
5.0
5.0
(mm)
16
—
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Apr. 2010