|
EEU-FR1C471 Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FR | |||
|
Radial Lead Type
Series: FR Type: A
â Features
â Low ESR (Same as FM Series)
â Endurance : 2000 h to 10000 h at +105 °C
â RoHS directive compliant
Aluminum Electrolytic Capacitors/ FR
â Country of origin
Malaysia
â Speciï¬cations
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
â40 °C to +105 °C
6.3 V.DC to 50 V.DC
22 µF to 8200 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
W.V.
6.3 10 16 25 35 50
tan δ
0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 µF for products of 1000 µF or more.
(120 Hz/+20 °C)
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits speciï¬ed below.
Duration
Ï5Ò11/ Ï6.3Ò11.2 : 2000 hours, Ï8Ò11.5/ Ï10Ò12.5 : 6000 hours
Ï8Ò15/ Ï10Ò16 : 8000 hours, Ï8Ã20 : 9000 hours
Ï10Ò20 to Ï10Ò25/ Ï12.5Ò20 to Ï12.5Ò35/ Ï16Ò20 to Ï16Ò25 : 10000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan δ
< 200 % of initial speciï¬ed value
DC leakage current < initial speciï¬ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciï¬ed in Endurance. (With voltage treatment)
â Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 50
Cap (µF)
22
47
390
1200
to
33
to 330
to 1000
to 8200
60
0.45
0.60
0.65
0.75
120
0.55
0.70
0.75
0.80
Frequency (Hz)
1k
0.75
0.85
0.90
0.95
10 k
0.90
0.95
0.98
1.00
100 k
1.00
1.00
1.00
1.00
â Dimensions in mm (not to scale)
Pressure relief
Ï6.3<
Sleeve
Ïd±0.05
+
<Ï8
â
[mm]
Ï10<
Lâ½
⽠L<16 : L±1.5
L>20 : L±2.0
14 min. 3 min.
Body Dia. ÏD
Body Length L
Lead Dia. Ïd
Lead space F
5
6.3
8
â
â
â
0.5
0.5
0.6
2.0
2.5
3.5
ÏD±0.5
ÏD±0.5
10
12.5
â
12.5 to 25 30 to 35
0.6
0.6
0.8
5.0
5.0
(mm)
16
â
0.8
7.5
Design and speciï¬cations are each subject to change without notice. Ask factory for the current technical speciï¬cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Apr. 2010
|
▷ |