EEU-FM1V681B Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Radial Lead Type

Radial Lead Type
Series: _FM Type: _A
■ Features
● Low impedance (40 % to 70 % less than FC Series)
● Endurance : 2000 h to 7000 h at +105 °C
● RoHS directive compliant
Aluminum Electrolytic Capacitors/ FM
■ Specifications
Category Temp. Range
–40 °C to +105 °C
Rated W.V. Range
6.3 V.DC to 50 V.DC
Nominal Cap. Range
22 µF to 6800 µF
Capacitance Tolerance
DC Leakage Current
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
tan δ
W.V.
tan δ
6.3 10 16 25 35 50
(max.) (120 Hz/+20 °C)
0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 µF for products of 1000 µF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specified below.
Duration
φ5 to φ6.3 : 2000 hours, φ8҂11.5 to φ8҂15: 3000 hours
φ8×20 to φ10҂16 : 4000 hours, φ10҂20 to φ12.5҂20/ φ16҂20: 5000 hours
φ12.5×25 to φ12.5҂35/ φ16҂25 : 7000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 50
Cap (µF)
22
47
390
1200
to
33
to 330
to 1000
to 6800
60
0.45
0.60
0.65
0.75
120
0.55
0.70
0.75
0.80
Frequency (Hz)
1k
0.75
0.85
0.90
0.95
10 k
0.90
0.95
0.98
1.00
100 k
1.00
1.00
1.00
1.00
■ Dimensions in mm (not to scale)
Pressure relief
φ6.3<
Sleeve
L^✽
✽ _{L<16 : L±1.5}
L>20 : L±2.0
φd±0.05
+
–
14 min. 3 min.
φ5 to φ8
φD±0.5
[mm]
φ10<
φD±0.5
Body Dia. φD
Body Length L
Lead Dia. φd
Lead space F
5
6.3
8
10
12.5
—
—
—
—
12.5 to 25 30 to 40
0.5
0.5
0.6
0.6
0.6
0.8
2.0
2.5
3.5
5.0
5.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
(mm)
16
—
0.8
7.5
May. 2008