EEU-FM1V471 Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FM

Aluminum Electrolytic Capacitors/ FM
Radial Lead Type
Series: _FM Type: _A
■ Features
● Low impedance (40 % to 70 % less than FC Series)
● Endurance : 2000 h to 7000 h at +105 °C
● RoHS directive compliant
■ Attention
Not applicable for automotive
■ Specifications
Category Temp. Range
–40 °C to +105 °C
Rated W.V. Range
6.3 V.DC to 50 V.DC
Nominal Cap. Range
22 µF to 6800 µF
Capacitance Tolerance
DC Leakage Current
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
tan δ
W.V.
6.3 10 16 25 35 50
tan δ
0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 µF for products of 1000 µF or more.
(max.) (120 Hz/+20 °C)
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specified below.
Duration
φ5 to φ6.3 : 2000 hours, φ8҂11.5 to φ8҂15: 3000 hours
φ8×20 to φ10҂16 : 4000 hours, φ10҂20 to φ12.5҂20/ φ16҂20: 5000 hours
φ12.5×25 to φ12.5҂35/ φ16҂25 : 7000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 50
Cap (µF)
22
47
390
1200
to
33
to 330
to 1000
to 6800
60
0.45
0.60
0.65
0.75
■ Dimensions in mm (not to scale)
120
0.55
0.70
0.75
0.80
Frequency (Hz)
1k
0.75
0.85
0.90
0.95
10 k
0.90
0.95
0.98
1.00
100 k
1.00
1.00
1.00
1.00
(Unit : mm)
Pressure relief
φ6.3<
Sleeve
L^✽
✽ _{L<16 : L±1.5}
L>20 : L±2.0
φd±0.05
+
–
14 min. 3 min.
φ5 to φ8
φD±0.5
φ10<
φD±0.5
Body Dia. φD
Body Length L
Lead Dia. φd
Lead space F
5
6.3
8
10
12.5
16
—
—
—
—
12.5 to 25 30 to 40
—
0.5
0.5
0.6
0.6
0.6
0.8
0.8
2.0
2.5
3.5
5.0
5.0
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-78 –
00 Nov. 2012