|
EEU-FK1V102L Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FK | |||
|
Radial Lead Type
Series: FK Type: A
â Features
â Low impedance (10 % to 30 % less than FC Series)
Miniaturization (30 % to 40 % less than FC Series)
â Endurance : 3000 h to 5000 h at +105 °C
â RoHS directive compliant
Aluminum Electrolytic Capacitors/ FK
â Speciï¬cations
Category Temp. Range
â55 °C to +105 °C
Rated W.V. Range
6.3 V.DC to 35 V.DC
Nominal Cap. Range
180 µF to 12000 µF
Capacitance Tolerance
DC Leakage Current
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
W.V.
6.3 10
16
25
35
tan δ
tan δ
0.22 0.19 0.16 0.14 0.12 (120 Hz/+20 °C)
Add 0.02 per 1000 µF for products of 1000 µF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors
are restored to 20 °C, the capacitors shall meet the limits speciï¬ed bellow.
Duration : Ï8: 3000 hours , Ï10: 4000 hours , Ï12.5 to Ï18: 5000 hours
Capacitance change ±20 % of initial measured value
tan δ
< 200 % of initial speciï¬ed value
DC leakage current < initial speciï¬ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciï¬ed in Endurance. (With voltage treatment)
â Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 35
Cap (µF)
180
390
1200
to 330
to 1000
to 12000
60
0.60
0.65
0.75
120
0.70
0.75
0.80
Frequency (Hz)
1k
0.85
0.90
0.95
10 k
0.95
0.98
1.00
100 k
1.00
1.00
1.00
â Dimensions in mm (not to scale)
Pressure relief
Sleeve
Lâ½
⽠L<16 : L±1.5
L>20 : L±2.0
Ïd±0.05
+
â
14 min. 3 min.
Ï8
ÏD±0.5
[mm]
Ï10<
ÏD±0.5
Body Dia. ÏD
Body Length L
Lead Dia. Ïd
Lead space F
8
10
12.5
16
â
â
12.5 to 25
30 to 40
â
0.6
0.6
0.6
0.8
0.8
3.5
5.0
5.0
5.0
7.5
Design and speciï¬cations are each subject to change without notice. Ask factory for the current technical speciï¬cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
(mm)
18
â
0.8
7.5
May. 2008
|
▷ |