EEU-FC2A330 Datasheet, PDF (1/10 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FC

Aluminum Electrolytic Capacitors/ FC
Radial Lead Type
Series: _FC Type: _A
■ Features
● Endurance : 105 °C 1000 h to 5000 h
● Low impedance
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
Endurance
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
1.0 µF to 15000 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
W.V. (V)
tan δ
6.3 10 16 25 35 50 63 100
(120 Hz/+20 °C)
0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07
For capacitance value > 1000 µF, add 0.02 per every 1000 µF.
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC
and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to
20 °C, the capacitors shall meet the limits specified bellow.
Duration : φ4 to φ6.3: 1000 hours, φ8: 2000 hours , φ10: 3000 hours , φ12.5 to φ18: 5000 hours
Capacitance change ±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 100
Cap (µF)
1.0 to 330
390 to 1000
1200 to 2200
2700 to 15000
60
0.55
0.70
0.75
0.80
120
0.65
0.75
0.80
0.85
Frequency (Hz)
1k
0.85
0.90
0.90
0.95
10 k
0.90
0.95
0.95
1.00
100 k
1.00
1.00
1.00
1.00
■ Dimensions in mm (not to scale)
(Unit : mm)
Pressure relief
φ6.3<
Sleeve
φd±0.05
+
But exclude 7 mm
–
height
L^✽
14 min. 3 min.
✽ L<16 : L±1.0
L>20 : L±2.0
(✽φ8҂15,
φ16҂15,
φ18҂15
:
L±1.5)
φ4 to φ8
φD±0.5
φ10<
φD±0.5
Body Dia. φD
Body Length L
Lead Dia. φd
Lead space F
4
5
0.45 0.5
1.5 2.0
L>11
L=7
6.3
8
10
12.5
16 18
4
5
6.3
15 to 25 30 to 40
0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.45 0.45 0.45
2.5 3.5 5.0 5.0 5.0 7.5 7.5 1.5 2.0 2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-63 –
00 Nov. 2012