EEU-FC1H330 Datasheet, PDF (1/10 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/FC

Aluminum Electrolytic Capacitors/FC
Radial Lead Type
Series: FC _{Type :A}
n Features _{Endurance : 105°C 1000 h to 5000 h}
Low impedance
Country of Origin
Japan
Malaysia
China
n Specifications
Category temp. range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
-55 to + 105°C
6.3 to 100 V .DC
1.0 to 15000 µ F
±20 % (120Hz/+20°C)
I < 0.01 CV or 3(µ A)
after 2 minues application of rated working voltage at +20°C (Whichever is greater)
tan δ
W.V.(V) 6.3 10 16 25 35 50 63 100
tan δ 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07
For capacitance value > 1000µF, add 0.02 per every 1000 µF.
Endurance
Shelf Life
After following life test with DC voltage and +105±2°C ripple current value applied (The sum of
DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall
meet the limits specified bellow.
Duration : 1000 hours (φ4 to 6.3), 2000hours (φ8), 3000 hours (φ10), 5000 hours (φ12.5 to 18)
Post test requirement at +20 °C
Capacitance change ±20% of initial measured value
tan δ
DC leakage current
< 200 % of initial specified value
< initial specified value
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitor shall meet the limits specified in Endurance. (With voltage treatment)
n Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 100
Capacitance
(µF)
1.0 to 330
390 to 1000
1200 to 2200
2700 to 15000
Frequency(Hz)
60 120 1k 10k
0.55 0.65 0.85 0.90
0.70 0.75 0.90 0.95
0.75 0.80 0.90 0.95
0.80 0.85 0.95 1.00
100k
1.0
1.0
1.0
1.0
n Dimensions in mm (not to scale)
(>6.3mm dia)
Vent
Sleeve
φd±0.05
φ10<
φ8>
But exclude 7mm
height product
Li
L <16:L+1.0 max ^{14 min}
3 min
L >20:L+2.0 max
iφ 8×15,φ 16×15,φ 18×15:L+1.5max
L=7
Body Dia. φD 4
5
6.3
4
5
6.3
Body Length L
Lead Dia. φd 0.45 0.45 0.45 0.45 0.5 0.5
Lead space P 1.5 2 2.5 1.5 2.0 2.5
φD+0.5 max
φD+0.5 max
L >11
8
10
0.6 0.6
3.5 5.0
12.5
16 18
15 to 25 30 to 35
0.6 0.8 0.8 0.8
5.0 5.0 7.5 7.5
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar. 2005
 EE59 