EEU-FC1C471LJ Datasheet, PDF (1/10 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FC

Aluminum Electrolytic Capacitors/ FC
Radial Lead Type
Series: _FC Type: _A
■ Features
● Endurance : 105 °C 1000 h to 5000 h
● Low impedance
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
Endurance
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
2.2 μF to 15000 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
W.V. (V)
tan d
6.3 10 16 25 35 50 63 100
(120 Hz/+20 °C)
0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07
For capacitance value > 1000 μF, add 0.02 per every 1000 μF.
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC
and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to
20 °C, the capacitors shall meet the limits specified bellow.
Duration : 04 to 06.3: 1000 hours, 08: 2000 hours , 010: 3000 hours , 012.5 to 018: 5000 hours
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 100
Cap (μF)
60
2.2 to 330
0.55
390 to 1000
0.70
1200 to 2200
0.75
2700 to 15000
0.80
Frequency (Hz)
120
1k
10 k
0.65
0.85
0.90
0.75
0.90
0.95
0.80
0.90
0.95
0.85
0.95
1.00
100 k
1.00
1.00
1.00
1.00
■ Dimensions in mm (not to scale)
(Unit : mm)
Pressure relief
06.3
Sleeve
0d±0.05
+
But exclude 7 mm
–
height
L⁼
14 min. 3 min.
=L16
L20
:
:
L±1.0
L±2.0
(=08L15,
016L15,
018L15
:
L±1.5)
04 to 08
0D±0.5
010
0D±0.5
Body Dia. 0D
Body Length L
Lead Dia. 0d
Lead space F
L>11
4
5
6.3
8
10
12.5
16
15 to 25 30 to 40
0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8
1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5
L=7
18
4
5
6.3
0.8 0.45 0.45 0.45
7.5 1.5 2.0 2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Dec. 2013
– EEE-63 –