|
EEU-EB1H470H Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ EB | |||
|
Radial Lead Type
Series: EB Type: A
Aluminum Electrolytic Capacitors/ EB
â Features
â Endurance : +105 °C 5000 h to 10000 h
â Hight ripple hight frequency (Hight Voltage)
â RoHS directive compliant
â Speciï¬cations
Category Temp. Range
â40 °C to +105 °C
â25 °C to +105 °C
Rated W.V. Range
10 V.DC to 63 V.DC
160 V.DC to 450 V.DC
Nominal Cap. Range
0.47 µF to 3300 µF
10 µF to 330 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV or 3 (µA)
After 2 minutes application of rated working voltage at +20 °C (Whichever is greater)
tan δ
Please see the attached standard products list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when
the capacitors are restord to 20 °C, the capacitors shall meet the limits speciï¬ed below.
Endurance
(10 to 63 V.DC)
Duration : Ï5Ò11 to Ï8Ò11.5 : 5000 hours Ï5Ò15 to Ï6.3Ò15 : 7000 hours
Ï8Ò15 to Ï12.5Ò25 : 10000 hours
Capacitance change ±30 % of initial measured value
tan δ
< 300 % of initial speciï¬ed value
DC leakage current < initial speciï¬ed value
Shelf Life
(160 to 450 V.DC)
Duration : 5000 hours
Capacitance change
tan δ
DC leakage current
±20 % of initial measured value
< 200 % of initial speciï¬ed value
< initial speciï¬ed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciï¬ed in Endurance. (With voltage treatment)
â Frequency correction factor for ripple current
(10 ~ 63 V.DC)
Capacitance
(µF)
0.47 to 10
22
1000
to 470
to 3300
Frequency (Hz)
60 120 1 k 10 k 100 k
0.75 1.00 1.40 1.55 1.65
0.85 1.00 1.20 1.25 1.30
0.95 1.00 1.05 1.10 1.15
W. V.
(V. DC)
120
160 to 250 0.55
350 to 450 0.50
Frequency (Hz)
1 k 10 k to 30k 30 k to 100k
0.85
0.90
1.00
0.80
0.90
1.00
â Dimensions in mm (not to scale)
(Unit : mm)
Pressure relief
Ï6.3<
Sleeve
Ïd±0.05
+
â
Ï5 to Ï8
Ï10<
Lâ½
14 min. 3 min.
â½ L<16 : L±1.0 (Ï8Ò15 only L±1.5)
L>20 : L±2.0
ÏD±0.5
ÏD±0.5
Body Dia. ÏD
Lead Dia. Ïd
Lead space F
5
6.3
8
10
12.5
16
18
0.5
0.5
0.6
0.6
0.6
0.8
0.8
2.0
2.5
3.5
5.0
5.0
7.5
7.5
Design and speciï¬cations are each subject to change without notice. Ask factory for the current technical speciï¬cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
â EEE-87 â
00 Nov. 2012
|
▷ |