EEU-EB1H100S Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ EB

Radial Lead Type
Series: _EB Type: _A
Aluminum Electrolytic Capacitors/ EB
■ Features
● Endurance : +105 °C 5000 h to 10000 h
● Hight ripple hight frequency (Hight Voltage)
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +105 °C
–25 °C to +105 °C
Rated W.V. Range
10 V.DC to 63 V.DC
160 V.DC to 450 V.DC
Nominal Cap. Range
0.47 µF to 3300 µF
10 µF to 330 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV or 3 (µA)
After 2 minutes application of rated working voltage at +20 °C (Whichever is greater)
tan δ
Please see the attached standard products list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when
the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.
Endurance
(10 to 63 V.DC)
Duration : φ5҂11 to φ8҂11.5 : 5000 hours φ5҂15 to φ6.3҂15 : 7000 hours
φ8҂15 to φ12.5҂25 : 10000 hours
Capacitance change ±30 % of initial measured value
tan δ
< 300 % of initial specified value
DC leakage current < initial specified value
Shelf Life
(160 to 450 V.DC)
Duration : 5000 hours
Capacitance change
tan δ
DC leakage current
±20 % of initial measured value
< 200 % of initial specified value
< initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
(10 ~ 63 V.DC)
Capacitance
(µF)
0.47 to 10
22
1000
to 470
to 3300
Frequency (Hz)
60 120 1 k 10 k 100 k
0.75 1.00 1.40 1.55 1.65
0.85 1.00 1.20 1.25 1.30
0.95 1.00 1.05 1.10 1.15
W. V.
(V. DC)
120
160 to 250 0.55
350 to 450 0.50
Frequency (Hz)
1 k 10 k to 30k 30 k to 100k
0.85
0.90
1.00
0.80
0.90
1.00
■ Dimensions in mm (not to scale)
Pressure relief
φ6.3<
Sleeve
φd±0.05
+
–
φ5 to φ8
φ10<
[mm]
Body Dia. φD
Lead Dia. φd
Lead space F
L^✽
14 min. 3 min.
✽ L<16 : L±1.0 (φ8҂15 only L±1.5)
L>20 : L±2.0
5
6.3
8
0.5
0.5
0.6
2.0
2.5
3.5
φD±0.5
φD±0.5
10
12.5
16
0.6
0.6
0.8
5.0
5.0
7.5
(mm)
18
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EE104 –
00 Sep. 2010