EEU-EB1A222B Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ EB

Radial Lead Type
Series: _EB Type: _A
Aluminum Electrolytic Capacitors/ EB
■ Features
● Endurance : +105 °C 5000 h to 10000 h
● Hight ripple hight frequency (Hight Voltage)
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
–40 °C to +105 °C
10 V.DC to 63 V.DC
2.2 μF to 3300 μF
–25 °C to +105 °C
160 V.DC to 450 V.DC
10 μF to 330 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV or 3 (μA)
After 2 minutes application of rated working voltage at +20 °C (Whichever is greater)
tan d
Please see the attached standard products list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when
the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.
Endurance
(10 to 63 V.DC)
Duration : 05×11 to 08×11.5 : 5000 hours 05×15 to 06.3×15 : 7000 hours
08×15 to 012.5×25 : 10000 hours
Capacitance change ±30 % of initial measured value
tan d
< 300 % of initial specified value
DC leakage current < initial specified value
Shelf Life
(160 to 450 V.DC)
Duration : 5000 hours
Capacitance change ±20 % of initial measured value
tan d
DC leakage current
< 200 % of initial specified value
< initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
(10 ~ 63 V.DC)
Capacitance
(μF)
0.47 to 10
22 to 470
1000 to 3300
Frequency (Hz)
60 120 1 k 10 k 100 k
0.75 1.00 1.40 1.55 1.65
0.85 1.00 1.20 1.25 1.30
0.95 1.00 1.05 1.10 1.15
W. V.
(V. DC)
160 to 250
350 to 450
120
0.55
0.50
Frequency (Hz)
1 k 10 k to 30k 30 k to 100k
0.85
0.90
1.00
0.80
0.90
1.00
■ Dimensions in mm (not to scale)
(Unit : mm)
Pressure relief
06.3
Sleeve

08
+
010
–
L⁼
14 min. 3 min.
=L16 : L±1.0 (08L15 only L±1.5)
L20 : L±2.0
0D±0.5
0D±0.5
Body Dia. 0D
Lead Dia. 0d
Lead space F
5
6.3
8
10
12.5
16
18
0.5
0.5
0.6
0.6
0.6
0.8
0.8
2.0
2.5
3.5
5.0
5.0
7.5
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 May. 2014
– EEE-87 –