|
EETXB2C271HJ Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Snap-in Type | |||
|
Snap-in Type
Series: XB Type: TS
â Features
â Endurance : 105 °C 7000 h
â RoHS directive compliant
Aluminum Electrolytic Capacitors/ XB
â Speciï¬cations
Category Temp. Range
â40 °C to +105 °C
â25 °C to +105 °C
Rated W.V. Range
160 V.DC to 250 V.DC
315 V.DC to 450 V.DC
Nominal Cap. Range
180 µF to 2200 µF
39 µF to 680 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
3ǰ CV (µA) max. After 5 minutes application of rated working voltage at +20 °C.
C : Capacitance (µF) V: W.V. (V.DC)
tan δ
Please see the attached standard products list
Frequency Correction Frequency (Hz)
Factor for Ripple Current Correction Factor
50
60
100
120
500
1 k 10 k to
0.75
0.80
0.95
1.00
1.20
1.25
1.40
After 7000 hours application of DC voltage with speciï¬ed ripple current (< rated DC working voltage)
at +105 °C±2 °C, the capacitors shall meet the following limits.
Endurance
Capacitance change <±20 % of initial measured value
tan δ
< 200 % of initial speciï¬ed value
DC leakage current < initial speciï¬ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized
at +20 °C, capacitor shall meet the limits speciï¬ed in Endurance (With voltage treatment)
â Dimensions in mm (not to scale)
Polarity bar
Sleeve
Vent
(10.0)
2-Ï2.0±0.1
10.0±0.1
(mm)
L+2.0 max.
4.0±0.5
Rated voltage etc. indicate to sleeve.
0.8+â00..21
(ÏD)
Recommended PWB piercing plan
2.0 max. Terminal
(t=0.8)
1.5±0.2
Top of spin
Standard terminal type does not require
terminal trimming process.
Design and speciï¬cations are each subject to change without notice. Ask factory for the current technical speciï¬cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008
|
▷ |