EETHD2G121HJ Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Snap-in Type
Series: _HD Type: _TS
Aluminum Electrolytic Capacitors/ HD
■ Features
● Endurance : 105 °C 3000 h
● 30 % smaller than series TS-HC
● RoHS directive compliant
■ Country of origin
Malaysia
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
–25 °C to +105 °C
400 V.DC to 450 V.DC
120 µF to 680 µF
±20 % (120 Hz/+20 °C)
DC Leakage Current
3ǰ CV (µA) max. After 5 minutes application of rated working voltage at +20 °C.
C : Capacitance (µF) V: W.V. (V.DC)
tan δ
Please see the attached standard products list
After 3000 hours application of DC voltage with specified ripple current (< rated DC working voltage)
at +105 °C, the capacitors shall meet the following limits.
Endurance
Capacitance change < ±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±20 °C within no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
Correction factor
50
60
0.75
0.80
Frequency (Hz)
100
120
500
0.95
1.00
1.20
1k
10 k to
1.25
1.40
■ Dimensions in mm (not to scale)
Polarity bar
P.E.T. Sleeve
Vent
(10.0)
2-φ2.0±0.1
10.0_±0.1
(mm)
L+2.0 max.
4.0±0.5
Rated voltage etc. indicate to sleeve.
0.8^{+–00..21}
(φD)
Recommended PWB piercing plan
2.0 max. Terminal
(t=0.8)
1.5±0.2
Top of spin
Standard terminal type does not require
terminal trimming peocess.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EE160 –
01 Jul. 2011